Fill Dirt in Pickett County, TN

Prices vary by source and moisture, but in Pickett County expect typical fill-dirt rates around $12 to $30 per ton. A common tri-axle load (10 to 12 tons) will therefore generally run in the low hundreds to several hundred dollars before any delivery or access fees. Final price depends on local supplier rates, haul distance, and whether the dirt is screened or contains clay or rocks.

Fine, processed fill-dirt in this area is usually called screened fill, screened subsoil, or class A fill. Contractors in Pickett County often ask for 'screened fill' when they want fewer rocks and a smoother, compactable material.

Coverage depends on depth and truck size, but a typical tri-axle load (about 10 to 14 cubic yards) will cover roughly 600 to 1,000 square feet at 4 inches depth. If you need a thicker lift (6 to 12 inches), that same load will cover much less area, so measure your desired depth before ordering.

The most cost-effective approach is to source local, unscreened fill from nearby suppliers or job-site cleanups to reduce haul time. Ordering larger quantities and scheduling standard delivery (2+ business days) also lowers unit cost; avoid specialty screened or amended soils if price is the main concern.

For a 20-foot-wide driveway, cost depends on length and desired depth. For example, a 20 ft by 50 ft driveway needing 6 inches of fill requires about 19 cubic yards (roughly 1.5 tri-axle loads) — expect the fill-dirt portion to cost from a few hundred to about $1,000 depending on material and delivery. Remember you will also need base material (crushed stone) and compaction for a durable driveway, which adds to total cost.

No. Fill-dirt compacts and gains strength when properly placed and compacted, but it will not harden like concrete. If you need a firm, hard surface in Pickett County conditions, plan to add and compact crushed stone or use soil stabilization products over the fill-dirt.

Unscreened subsoil or borrow dirt (often called clean fill) is typically the least expensive option because it requires minimal processing. Cheaper dirt can contain clay, small roots, or fines, so inspect for unwanted debris or organic matter if you need it for structural fills.

Our minimum order of 3 tons usually equals about 2 to 2.5 cubic yards of fill-dirt depending on moisture and soil type, which is enough to patch small low spots or build up a few inches over a small area. For larger areas you’ll likely order multiple loads; contact our team to calculate exact volumes and the most cost-efficient delivery.

Drivers may be able to perform tailgate spreading at their discretion, but this depends on site access, ground conditions, and safety. Request spreading at checkout and note that in rural Pickett County locations soft or steep terrain may prevent drivers from offering this service.