Fill-dirt in Kyles Ford, TN

Local prices vary, but typical fill-dirt in West Tennessee (Kyles Ford area) often falls between $10 and $25 per ton depending on local supply, haul distance, and seasonal demand. Rural delivery, small orders, or sites with restricted access can push costs higher. For an exact price, enter your zip code on Hello Gravel or request a local quote.

A single tri-axle dump truck load (roughly 10–14 tons of fill-dirt) delivered near Kyles Ford typically costs between $300 and $800 total, depending on material price, distance from the supplier, and any access constraints. Hello Gravel shows per-order delivery fees during checkout; request a quote for your exact address to see the firm price. Keep in mind Hello Gravel minimum order is 3 tons, and next-day delivery may cost extra.

Assuming typical West Tennessee fill-dirt density, one ton covers about 146 sq ft at 2u0022 depth, 73 sq ft at 4u0022 depth, and 49 sq ft at 6u0022 depth. A tri-axle truck with about 12 tons would therefore cover roughly 1,752 sq ft at 2u0022, 876 sq ft at 4u0022, or 588 sq ft at 6u0022. Always add 5–10% extra for compaction and grading.

Raw fill-dirt or 'bank run' subsoil is usually the least expensive material you can get near Kyles Ford because it is minimally processed. You can order it through Hello Gravel to connect with local suppliers and compare prices; the site shows available local products and delivery options once you enter your zip code. If you need better performance (drainage or compaction), budget for a higher-grade base material instead.

For 1,000 sq ft, you need roughly 10.3 tons for 3u0022 depth, 20.6 tons for 6u0022 depth. At $10–$25 per ton, material cost ranges from about $103 to $515, plus delivery (often $0–$300 depending on supplier and distance). Use Hello Gravel checkout for an exact quote tied to your address and delivery date.

Common alternatives include clean fill sand, crushed stone or roadbase (for load-bearing bases), recycled asphalt, and blended soils with more sand for improved drainage. Contractors in the Kyles Ford area often choose crushed stone or roadbase for driveways and structural bases, while sand or engineered fill is used where drainage is important. Ask Hello Gravel for local product availability and application advice.

Yes, loose fill-dirt can wash on slopes, especially during heavy West Tennessee rains; the risk increases on steeper slopes and with fine, silty or sandy fill. Compact the fill in lifts (no more than 4–6 inches before compaction) with a plate compactor and use erosion controls such as slope seeding, straw mulch, erosion control blankets, or silt fence. Ask at checkout if your driver can place material where it is easiest to compact, and consider hiring local compaction or erosion-control services for sloped sites.

Assuming a typical single-car driveway 20 ft long by 10 ft wide (about 200 sq ft) with a 4u0022 fill-dirt base and 3u0022 gravel topcoat, you would need roughly 2.7 tons of fill-dirt for the base and about 1.4 tons of gravel for the topcoat. Material costs could run roughly $40–$100 for fill-dirt and $20–$50 for gravel, plus delivery fees (often $0–$200 depending on supplier). Prices vary by product choice and access; get a Hello Gravel quote for precise numbers and adjust assumptions for different driveway dimensions.

The least expensive approach is usually ordering by the truckload (rather than small tonnage) and doing the spreading/compaction yourself if you have the tools and ability. DIY saves on labor, but remember Hello Gravel minimum is 3 tons and drivers only spread at their discretion. For small patches, buying a few tons and placing it yourself or arranging a local contractor for spreading only tends to be most cost-effective.

Stabilized or polymer-treated aggregates and engineered base products (used where a hard, low-maintenance surface is needed) are available from some regional suppliers but are less common and usually cost significantly more than plain fill-dirt. Expect stabilized products to run at least 2x to 4x the price of ordinary fill-dirt, depending on the product and treatment. If you need a hardened surface, ask Hello Gravel to check local availability and provide comparative quotes.

Contact Hello Gravel as soon as possible; changes are easiest before the order is processed and the truck is dispatched. We will do our best to accommodate modifications, but late changes or cancellations may incur supplier or trucking fees. Check the order confirmation email or call our team for the fastest help.