Fill Dirt in Glencliff, TN

Typical delivered prices for fill-dirt in the Glencliff/Nashville area over the past 12 months have generally ranged from about $12 to $30 per ton, depending on source, haul distance, and season. Hello Gravel requires a 3-ton minimum order; final price is shown at checkout and may fluctuate with fuel and local availability.

Suppliers that serve the Glencliff area include regional quarries and pits (examples include national aggregates operators plus local independent producers around the Nashville metro). Minimums vary by supplier, but Hello Gravel accepts orders starting at 3 tons while direct quarry loads often start higher (10+ tons); standard lead time is 2+ business days with next-day options for orders placed before noon CST.

Deliveries are typically made by tri-axle dump trucks (most common) which usually carry roughly 10–14 tons of loose fill-dirt depending on local weight limits and material moisture. Hello Gravel displays delivery fees up front and many areas show free delivery; tight access, long haul distances, or special drop locations can add extra charges.

For structural fills under driveways or pads, use well-graded granular fill or engineered fill with minimal organics rather than loose topsoil. Compact in 6–8 inch lifts to a target of about 90–95% relative compaction (Standard Proctor) and place a 4–6 inch crushed-stone base over the compacted fill for driveway surfaces on Glencliff's clay/limestone subsoils.

Glencliff experiences seasonal heavy rains and occasional freeze-thaw cycles that can worsen settlement and erosion in freshly placed, uncompacted fill. To reduce problems, avoid placing large fills during very wet periods, ensure thorough compaction, provide positive surface drainage, and use erosion control until vegetation or surfacing is installed.

For most small residential projects bringing in modest amounts of fill-dirt, a permit is not required, but regulations change if the work alters drainage, affects a floodplain, or involves significant grading or retaining walls. Always check Metro Nashville & Davidson County Codes (stormwater and grading rules) or call local permitting before large deliveries to confirm requirements.

Contractor pricing varies with site conditions, equipment, and access; a common range is about $45–$95 per hour for an operator with equipment, or roughly $6–$20 per cubic yard to spread and compact fill-dirt for straightforward residential jobs. Complex sites, tight access, removal of unsuitable material, or additional grading will raise costs—request on-site quotes for accurate pricing.

Fill-dirt is an economical bulk material for raising grades but often contains fines and variable rock content, so it is not ideal as a wearing surface. Crusher run or road base is better for driveway sub-bases and load-bearing layers, clean fill (free of organics) is preferred for engineered fills, and topsoil is for planting; choose based on structural needs, drainage, and final surface to balance cost and performance.

Have the delivery area measured and clear access for a tri-axle truck, note any overhead wires or tight turns, and upload site photos when ordering so suppliers can plan the drop. Ask about the material source and request a small sample or photo, schedule deliveries for drier weather when possible, request tailgate spreading at checkout if desired (driver discretion), and confirm the 3-ton minimum before placing your order.