Gravel in Fall Branch, TN

For a 10x10 (100 sq ft) area: 2 inches deep = about 0.9 tons; 3 inches = about 1.3 tons; 4 inches = about 1.7 tons. These are estimates based on 1.4 tons per cubic yard; actual weight varies by stone type and moisture. Note Hello Gravel has a 3-ton minimum order, so plan accordingly.

As a rule of thumb: 2 inches deep = about 0.0086 tons per sq ft, 3 inches = 0.0126 tons per sq ft, 4 inches = 0.0163 tons per sq ft. Multiply those numbers by your driveway square footage and round up for compaction and waste. Use our material calculator or contact our team if you want a site-specific estimate for Fall Branch.

Costs vary by material, distance, and truck availability, but many Fall Branch customers see delivered gravel in a range broadly between $20 and $60 per ton including delivery for common crushed stone or pea gravel. Hello Gravel often offers free delivery in many areas and requires a 3-ton minimum; next-day delivery is available for an extra fee when ordered before noon CST. For an exact rate, enter your zip code or get a quote so we can match you with local suppliers and haulers.

Crushed stone with angular pieces (#57 stone or crushed limestone) and a well-compacted base perform best in West Tennessee because they lock together and shed water. Pea gravel and river rock drain well but can shift and wash in heavy rain without a stable base and edging. For areas prone to freeze-thaw, use a compacted base layer of larger, well-graded stone under a topcoat of #57 or 3/4u0022 crushed stone and consider geotextile fabric.

Prep the subgrade, install geotextile fabric if drainage or soft soils are a concern, then place a 4u0022 to 8u0022 compacted base of larger crushed stone before a 2u0022 to 3u0022 finished layer of #57 or 3/4u0022 crushed stone. Crown the driveway (1/4u0022 to 1/2u0022 per foot) for runoff, compact each layer, and add edge restraints to limit spreading. These practices reduce washouts during heavy rains common in West Tennessee and help control frost heave.

Many local suppliers and contracted haulers serving Fall Branch provide delivery, and some drivers may offer tailgate spreading at their discretion. Hello Gravel connects you with nearby suppliers and shows delivery options at checkout; you can request spreading but it is not guaranteed and the driver will assess feasibility on site. Contact our team or check your quote to see which local suppliers and services are available in your zip code.

In West Tennessee climates, expect to regrade and add gravel every 1 to 3 years depending on traffic, drainage, and rainfall. Typical homeowners might add 1 to 3 tons over a few years for a single-car driveway; material-only costs in the region commonly fall in the $20 to $60 per ton range, with labor or spreading adding to that. Regular regrading, proper drainage, and keeping vegetation away from edges reduce long-term costs.

Material-only prices for common gravels in the Fall Branch area generally range from about $20 to $60 per ton depending on type and distance. Installed costs (including base prep, compaction, and labor) for driveways often fall roughly between $2 and $6 per sq ft for basic gravel installs; decorative patios or finely finished projects with edging and proper base can run $5 to $12 per sq ft. For an accurate local quote, use Hello Gravel to check materials, delivery, and contractor options in your zip code.

Gravel is much less expensive up front and easier to repair, making it a practical choice for low-traffic rural lanes around Fall Branch, but it needs periodic maintenance like regrading and adding material. Asphalt and concrete cost more initially and require less frequent routine grading, but they have higher upfront installation costs and can suffer from freeze-thaw cracks if not properly installed. Choose gravel when you want lower initial cost and easy repairs; choose asphalt or concrete if you prefer a low-maintenance surface and are willing to invest more up front.