Fill-dirt in Elizabethton, TN

Delivered fill-dirt prices in Elizabethton typically range from about $15 to $35 per ton, or roughly $40 to $90 per cubic yard depending on material type, truck access, and distance from the supplier. Exact cost depends on whether the dirt is screened/clean, how much you order (Hello Gravel minimum is 3 tons), and delivery conditions—request a local quote for a firm price.

Coverage depends on depth and the material's density, but a useful rule is to work in cubic yards: 1 cubic yard covers about 108 sq ft at 3 inches deep. Since fill-dirt weighs roughly 1.1 to 1.4 tons per cubic yard, 1 ton will typically cover about 75 to 100 sq ft at 3 inches; adjust up or down for different depths.

One cubic yard of typical fill-dirt in the Elizabethton area usually costs in the $40 to $90 range delivered, depending on screening and site access. A cubic yard of fill-dirt generally weighs about 1.1 to 1.4 tons, so plan using that range and ask Hello Gravel for the material weight used in your quote.

Hello Gravel commonly uses tri-axle dump trucks that carry about 10 to 12 cubic yards loose, which translates to roughly 12 to 18 tons of fill-dirt depending on moisture and local weight limits. Truck capacity can vary by local regulations and equipment, so your order confirmation will list the exact load and any multiple-truck staging if needed.

Buying bulk delivered fill-dirt is usually the most cost-effective option compared with bags or multiple small orders. To save money, order the largest practical quantity, request unscreened material if acceptable for your use, and compare Hello Gravel quotes from a few local suppliers—just be sure any very cheap fill is appropriate and free of contaminants.

For a 10x10 area (100 sq ft), a 3-inch layer requires about 0.93 cubic yards, which is roughly 1 cubic yard or about 1.1 to 1.4 tons of fill-dirt. If you need a deeper fill (for example 6 inches), double that to about 1.85 cubic yards (roughly 2 cubic yards).

One cubic yard of fill-dirt is roughly 15 to 18 wheelbarrow loads for a standard home wheelbarrow. The exact number depends on the size of your wheelbarrow and how full you load it.

No, fill-dirt is not a substitute for topsoil. Fill-dirt is intended to raise grade and provide structural fill and usually lacks organic matter and nutrients, so always cap it with several inches of quality topsoil if you plan to grow grass or plants.

No, 2 inches of fill-dirt is not adequate for a driveway base or structural pad. Driveways need a properly compacted base of structural fill or crushed stone at least 4 to 8 inches depending on traffic, frost conditions, and the surface material—fill-dirt alone should not be used as the finished driving surface.

To estimate, pick a width and depth: for a 100 ft long by 10 ft wide driveway at 4 inches depth, you need about 12.3 cubic yards (100 x 10 x 0.33 ft = 333 cu ft = 12.3 cu yd), roughly 14 to 17 tons of fill-dirt. Increase depth or width accordingly and contact Hello Gravel for a precise quote and delivery plan.

Fill-dirt may include small rocks and occasional organic matter unless you specifically order screened or clean fill. Suppliers and regional geology vary, so add a note at checkout requesting screened or clean fill if you need material free of rocks and debris, and we will pass that request to the supplier (no guarantees on availability).

Hello Gravel's standard delivery window is 2+ business days, with a next-day option available for orders placed before noon CST for an extra fee. Delivery timing also depends on supplier schedule, truck access, and order size; you can choose a preferred date at checkout and we will confirm availability.

Local rules can vary, so check with the City of Elizabethton or Carter County building and zoning departments before ordering large volumes. Permits or restrictions may apply for changes to grade, erosion control, or drainage, and it is your responsibility to obtain any required permits before delivery.

Measure the length and width of the area, decide the depth in inches, then use this formula: cubic yards = (length ft x width ft x depth in) / 324. Once you have cubic yards, multiply by the local tons-per-cubic-yard figure (typically 1.1 to 1.4 for fill-dirt) or use Hello Gravel's online calculator and contact our sales team for help with project-specific estimates.