Fill-dirt in Drummonds, TN

For quick estimating, 100 square feet needs about 1.2 tons at 3u0022 depth, 2.3 tons at 6u0022, and 3.1 tons at 8u0022 when using typical compacted fill-dirt density. Expect to order 10-20% extra to allow for compaction and settling, and round up to meet Hello Gravel's 3-ton minimum.

Prices vary, but expect material plus delivery in rural West Tennessee to commonly run between $10 and $25 per ton for basic fill-dirt, with total truckload deliveries often between $150 and $600 depending on quantity and distance. Hello Gravel shows local rates for your zip code at checkout; rural addresses may incur extra hauling or minimum-order charges.

Fill-dirt is fine for raising grades and filling low spots in clay-heavy yards, but on its own it does not make a durable wearing surface for driveways. For driveways we recommend using fill-dirt to bring elevations up, then a structural base of crushed stone or recycled concrete under the driving surface to improve drainage and reduce rutting.

A clean, well-graded fill-dirt with minimal organics is best as general fill; for driveway bases choose a blend that includes some coarse granular material or follow the fill with a layer of crusher run or 3/4u0022 crushed stone. Local suppliers in West Tennessee often offer screened fill-dirt and blended base mixes—ask your Hello Gravel supplier for a stabilized mix if you need a load-bearing layer.

In Drummonds' climate fill-dirt will shed water poorly if placed directly on clay and without drainage, so ponding and settling are the main concerns after heavy rain. Freeze-thaw cycles here are moderate but can still cause minor heaving; good grading, drainage swales, and compacted lifts reduce water infiltration and long-term movement.

For private yard work you usually do not need a permit, but any work affecting public right-of-way, driveways connecting to county or state roads, or stormwater flow can require permits or coordination. Check Tipton County codes and contact Tennessee DOT for work adjacent to state routes before placing fill-dirt near roadways.

Contractor prices vary with scale, but expect spreading and compacting to run roughly $75 to $150 per hour for an operator with equipment, or a per-ton installed rate often between $10 and $40 per ton depending on access and job complexity. Small jobs commonly have minimums; get local quotes and ask if the price includes compaction in lifts and final grade work.

Compacted fill-dirt used as a subgrade can perform for many years, but without a proper stone base and drainage it will likely need regrading or topping within 3 to 10 years depending on traffic and wet seasons. Regular maintenance like fixing low spots and improving surface drainage will extend its useful life.

Use fill-dirt when you need to raise elevation or fill large areas economically; use crushed stone or recycled concrete as the structural base and wearing surface because they drain better and resist rutting. A common approach in Drummonds is bulk fill-dirt to set grade, then 4-6 inches of compacted crushed stone or recycled concrete for the driveway surface.

Remove vegetation and topsoil where fill will contact the subgrade, grade to shed water, consider geotextile fabric on soft spots, and place fill in 4-6u0022 lifts with compaction between lifts. Small homeowner costs for fabrics, basic grading, and compaction can range from a few hundred dollars to over a thousand, while contractor prep with equipment is typically quoted per hour and varies by job size and access.

Homeowners get fill-dirt from local quarries, landscape yards, farm pits, and aggregate suppliers; Hello Gravel connects you to local suppliers so you can compare material and delivery options. Typical delivery radiuses for economical rates are 30 to 60 miles from the quarry or pit, but Hello Gravel will show available suppliers and delivery pricing for your Drummonds zip code.