Gravel in Dickson, TN

Prices vary by material and supplier, but a 10-yard load of common crushed gravel in Dickson typically ranges from about $300 to $900 delivered. Costs depend on gravel type (pea gravel, crushed stone, river rock), haul distance, and seasonal demand. For an exact price and next-day availability, request a local quote and check your zip code on our site.

In West Tennessee a standard dump truck load (roughly 10–14 cubic yards) usually costs between $350 and $1,200 depending on the material and distance from the pit. Heavier or decorative gravels and longer hauls push costs higher, while basic crushed stone is at the lower end. Hello Gravel can connect you with local suppliers for firm pricing and scheduled delivery.

Use this quick example: for a 20 ft long by 10 ft wide driveway, 3 inches of gravel equals about 1.9 cubic yards (roughly 2.4 tons). At typical local prices of $30 to $60 per ton, materials for that 3u0022 layer would cost about $70 to $145, plus any delivery fee. If you need a different width, length, or deeper base, plug your measurements into our material calculator or get a local quote for an exact total.

Two inches is generally not enough for a long-lasting driveway in Dickson; it works only as a light surface dressing. For resurfacing, 3 to 4 inches is common; for a new driveway or heavy use, plan on a 6 to 8 inch compacted base with proper grading. Local rainfall and occasional freeze-thaw cycles make a solid base and good drainage especially important here.

A 10 cubic yard truck holds about 270 cubic feet of gravel. At 3 inches deep that covers roughly 1,080 square feet; at 4 inches about 810 square feet; and at 6 inches about 540 square feet. If you have a different truck size or depth in mind, multiply cubic yards by 27 to get cubic feet and divide by the depth in feet to find square feet covered.

For most homeowners needing several tons, bulk delivery is the most cost-effective per ton and saves you multiple trips. If you need under 3 tons and have a truck, buying and picking up small loads from a local yard can be cheaper. Hiring a contractor adds labor costs but may be worth it for grading, compaction, or full installation work.

Typical ranges for common gravel in Dickson are about $25 to $65 per ton (roughly $35 to $85 per cubic yard), but prices change with material type and season. Hello Gravel has a minimum order of about 3 tons for delivery in many areas; some suppliers set a minimum dollar amount or charge a delivery fee for short hauls. Get a zip-code-specific quote on our site for current pricing and minimums.

For a standard 100 ft long by 10 ft wide driveway at a 4 inch depth you need about 12.3 cubic yards (roughly 16 tons) of gravel. At $30 to $60 per ton, expect material costs around $480 to $960, plus delivery and any spreading/installation fees, so a realistic total is roughly $600 to $1,500 depending on material and hauling distance. Request a local quote to get an exact price for your address and desired gravel type.

Yes. Hello Gravel connects you with local suppliers and haulers who can give custom quotes based on amount, gravel type, delivery location, and optional spreading. Check availability for your zip code on our site or contact our team at 855-241-8884 (or text 844-407-3734) with project details to get a firm estimate and scheduled delivery window.

Cheaper alternatives can include reclaimed asphalt millings or crushed concrete, which are often lower cost per ton and compact well for driveways. They may save money upfront but can look different and have different drainage and maintenance needs compared with natural gravel. Paved options like asphalt or concrete cost more up front but require less frequent replenishing; consider expected use, drainage, and local climate when choosing.