Gravel in Balmoral, TN

Prices vary by gravel type and local supplier, so there is no single fixed price for a 10-yard load in the Balmoral area. Use the volume-to-weight conversion (10 cubic yards is roughly 13–16 tons depending on rock density) and multiply by your local per-ton price, then add delivery. Hello Gravel can provide an exact quote for your ZIP code and preferred material.

Cost depends on the pea gravel grade, availability, and delivery distance from Balmoral suppliers, so prices fluctuate. Tri-axle dump trucks usually carry about 10–12 cubic yards; contact Hello Gravel for a firm per-yard or per-ton price and any delivery fees. We can compare local supplier rates so you know your total cost before ordering.

Prices per ton vary by material and supplier in the Balmoral area, so get a local quote for an exact dollar amount. As a volume guide, one ton of typical gravel equals about 0.6–0.8 cubic yards (1 cubic yard of gravel commonly weighs about 1.3–1.6 tons). Use this to convert between tons and cubic yards when estimating orders.

One cubic yard is 27 cubic feet, so coverage depends on desired depth. As examples, one yard covers about 160 sq ft at 2 inches deep, about 108 sq ft at 3 inches, and about 54 sq ft at 6 inches. Choose the depth that fits your project and adjust quantities for compaction and slope.

A common tri-axle dump truck holds roughly 10–12 cubic yards, which covers different areas depending on depth. For example, 10 cubic yards will cover about 1,080 sq ft at 3 inches or about 1,600 sq ft at 2 inches. Local truck capacities and material density vary, so confirm the exact truck size and volume when you order.

Quantity depends on driveway width and desired depth. For a typical single-car driveway 20 ft long by 10 ft wide at 3 inches deep you need about 2 cubic yards (roughly 3–4 tons). If your driveway is wider or you want a thicker base, increase the volume accordingly and consider ordering extra for settling and compaction.

Costs depend on the gravel type, local per-ton or per-yard price, and delivery. Estimate your cubic yards needed (for a 20 ft by 10 ft driveway at 3 inches depth that’s about 2 yards), then request local pricing via Hello Gravel to include material and delivery. We provide transparent quotes so you can compare material options and total cost.

Pea gravel is attractive and drains well, but it shifts underfoot and can wash out on slopes in the Tennessee climate. It tracks into houses more easily, is not wheelchair or stroller friendly, and may not be ideal for driveways with frequent vehicle traffic. For driveways or paths where stability matters, consider compactable crushed stone instead.

Volume-wise, one cubic yard may fit in some full-size pickups with extended beds, but weight is the limiting factor for many vehicles. One yard of gravel can weigh roughly 2,200–3,200 pounds depending on rock type, which can exceed a pickup’s payload rating. Always check your truck’s payload capacity and local road rules before hauling; for most Balmoral customers, delivery by dump truck through Hello Gravel is the safer option.

Buying in bulk delivered by dump truck is usually cheaper per unit than buying bagged gravel from retail stores. Choose commonly available local materials like crusher run or standard crushed stone instead of specialty decorative gravels to keep costs down. Use Hello Gravel to compare local supplier pricing and delivery options for the most economical choice.

Capacity depends on side height and weight limits, but a 7x14 trailer with 1-foot sides holds about 3.6 cubic yards, while 2-foot sides double that volume to about 7.2 cubic yards. In practice you must also respect the trailer’s weight rating; heavy gravel loads can exceed the axle or hitch limits. Check your trailer’s rated payload and local weight laws before loading gravel.

Common materials like crusher run, screenings, or standard crushed stone tend to be the most budget-friendly because they are widely produced locally. Decorative gravels, colored stone, and specialty mixes cost more due to processing and transport. Ask Hello Gravel for local low-cost material recommendations based on your project and location.

For a 10 ft by 10 ft area (100 sq ft), gravel volume depends on depth: about 0.6 cubic yards at 2 inches, about 0.9 cubic yards at 3 inches, and about 1.8 cubic yards at 6 inches. Convert cubic yards to tons using local density (roughly 1.3–1.6 tons per cubic yard) and round up for compaction and waste.

A good rule of thumb is about 56 fifty-pound bags per cubic yard, based on typical gravel weights. Regional rock density varies, so the actual number can range from about 52 to 64 bags. Buying by the yard and having it delivered is usually simpler and often less expensive than buying many bags.

Twenty tons of gravel is roughly 12–16 cubic yards depending on material density. At a 3-inch depth, that amount will cover roughly 1,200–1,700 square feet, which for a 10-foot-wide driveway translates to about 120–170 linear feet. Exact coverage depends on the gravel type and compaction, so ask Hello Gravel for a tailored estimate for your Balmoral driveway.