Gravel in Walterboro, SC

Prices vary by type and supplier, but in general crushed stone is often a bit more expensive than natural rounded gravel because it requires crushing and screening. Local availability matters in Walterboro: materials sourced nearby will be cheaper than those trucked long distances. Contact Hello Gravel for a local quote so you can compare exact delivered prices for the material you want.

'Type 4' is not a universal term and can mean different things to different suppliers or state DOTs; locally it often refers to a specific size or mix used for driveways or base layers. If you see u0022Type 4u0022 on a listing, ask the supplier for the size range, fines content, and typical uses. Hello Gravel can confirm the local equivalent and suggest a material match for your project in Walterboro.

No, 2 inches is generally too thin for a driveway. For a stable residential driveway in Walterboro's sandy Lowcountry soils, plan on at least 3 inches of compacted gravel for passenger cars and 4 inches or more for heavier vehicles or poor subgrade. Also prepare a compacted base (crusher run) and good drainage to avoid rutting after heavy rains.

That depends on the gravel type and delivery distance, but a typical delivered range in the Walterboro area is about $35 to $70 per cubic yard. A 10-yard load would therefore be roughly $350 to $700 before any special fees, with variation for decorative stone, crushed base, or extra haul distance. Request a Hello Gravel quote for an exact delivered price and note our minimum order is 3 tons.

Costs vary with length, depth, site prep, and contractor rates, so here is a typical estimate for a 20 ft wide by 50 ft long driveway (1,000 sq ft): material only (3u0022 to 4u0022 depth) is usually $400 to $1,000, and total installed cost including grading, base, and compaction is commonly $1,500 to $4,000. Get local contractor bids because poor subgrade, drainage work, or additional features will raise the price in Walterboro's climate.

No common gravel simply turns into concrete on its own, but some products are made to lock together: 'crusher run' compacts hard, and stabilized or polymer-treated gravel systems bind fines for a firmer surface. These can create a hard, low-maintenance surface suitable for driveways in many cases, but they are not equivalent to poured concrete for load-bearing or long-term durability. For patios or heavy-use driveways in Walterboro, discuss options with suppliers so you choose a solution appropriate for local rainfall and soil conditions.

Generally you should not use loose sand as a base for a driveway because it shifts and settles. Instead, use a compacted aggregate base (like crusher run) over a prepared subgrade; on very soft or sandy spots a geotextile fabric can help stabilize the subgrade. Sand is appropriate as a bedding layer for pavers, but for a gravel driveway in Walterboro you want compaction and drainage-first construction.

Four cubic yards equals 108 cubic feet. At typical depths that covers about 648 sq ft at 2 inches deep, 432 sq ft at 3 inches deep, or 324 sq ft at 4 inches deep. Choose depth based on use: 2u0022 for decorative topping, 3u0022 for light foot traffic or paths, and 3u0022 to 4u0022 (or more) for driveways.