Gravel in Seabrook, SC

Hello Gravel requires a 3-ton minimum order. Many local deliveries to Seabrook are free, but delivery fees can range from about $0 to $150 depending on supplier distance, access, and truck maneuverability. Expect next-day delivery only if ordered before noon CST and standard delivery in 2+ business days.

Prices vary by type and region, but in South Carolina you can expect approximate retail ranges: crusher run $18-$35 per ton, pea gravel $30-$60 per ton, and crushed stone (#57) $20-$45 per ton. A good rule of thumb is about 1.2-1.4 tons per cubic yard, so multiply those per-ton prices by roughly 1.3 to estimate per-cubic-yard cost.

For driveways in Seabrook, crusher run (also called dense graded) is a good base because it compacts well, while #57 crushed stone or pea gravel make good top layers for drainage and appearance. For high-drainage areas, use washed, angular stone like #57 or open-graded stone that allows water to pass through, and avoid fine, dusty mixes that hold water in humid conditions.

Amounts depend on desired depth. For a basic 2-car driveway (about 400-600 sq ft) expect roughly 5-12 tons of material depending on whether you install a 3-6 inch layer; a 500 sq ft patio needs about 3-8 tons depending on 2-4 inch depth. These are estimates—use our material calculator or ask Hello Gravel for a more precise quote based on your exact dimensions and chosen material.

Yes. Hello Gravel connects you with trusted local suppliers and haulers in the Seabrook area through our online marketplace. For installation contractors, we can point you to local landscapers and paving contractors in our network or recommend searching local directories and reviews; always ask for references and proof of insurance.

Permitting and HOA rules vary. Many residential gravel driveways do not require a county permit, but Seabrook homeowners should check Beaufort County or town planning and their HOA rules for curb cuts, driveway width, stormwater, or floodplain restrictions. When in doubt, contact local planning/permit offices and your HOA before starting work.

With proper base prep and drainage, a gravel driveway in Seabrook can perform well for 5-15 years before major refreshes are needed. Plan on light annual maintenance (raking, filling low spots, repairing washed areas) and adding 1-3 inches of fresh topstone every 2-6 years depending on traffic and storm exposure. Heavy storms or flooding common to coastal areas will increase maintenance frequency.

Installed costs vary, but expect a rough estimate of $2-$8 per sq ft. Typical breakdown: grading and base prep $0.50-$2.50 per sq ft, geotextile fabric $0.20-$0.60 per sq ft, base material (crusher run) $15-$40 per ton delivered, edging $3-$10 per linear foot, and labor/trucking additional based on access. For a 20x20 two-car driveway, total installed costs commonly fall between $1,500 and $5,000 depending on scope and site conditions.

Gravel drains best and is cheapest upfront; it can tolerate occasional flooding but needs more maintenance after storms. Asphalt is smoother and lower maintenance for traffic but can be damaged by standing water and may need a more robust subsurface in flood-prone spots. Pavers offer the best longevity and aesthetics and can be designed for permeability, but they cost significantly more and require a proper base to resist shifting in sandy coastal soils.

Start with a well-drained grade and proper slope to shed water. Use 4-6 inches of compacted crusher run as a base and consider geotextile fabric to separate soils—especially useful where clay meets sand—but note fabric is not a substitute for proper base depth. Install solid edging (steel, concrete, or heavy timber) to hold material, and compact layers with a plate compactor; for sandy or wet sites, increase base depth and add drainage swales or perforated drains.