Fill-dirt in Scranton, SC

Yes, fill dirt is usually cheaper than processed gravel in the Scranton area because it is less processed and typically sourced locally. Typical delivered prices in West South Carolina vary, but expect fill dirt to run lower per cubic yard than comparable crushed stone; exact pricing depends on supplier, delivery distance, quality, and minimum orders. Contact Hello Gravel for an area-specific quote and availability.

Fill dirt is natural soil used to raise grade or fill holes; it contains fines and may include clay, sand, and small rocks. Gravel is crushed or rounded stone used for drainage and stable surfaces. For projects in Scranton, use fill dirt for bulk grading and compacted subgrade, and gravel for driveways, drainage, and finished surfaces.

Prices in the Scranton area typically vary based on quality and delivery, but a reasonable ballpark range is $10 to $30 per cubic yard (roughly $8 to $25 per ton), depending on supplier and distance. Hello Gravel requires a minimum order of 3 tons and can provide a precise delivered price for your zip code.

Calculate volume by multiplying area by depth. For 1,000 sq ft: 3 inches of fill = about 9.3 cubic yards (roughly 11 to 12 tons); 6 inches = about 18.5 cubic yards (roughly 22 to 24 tons). Use Hello Gravel's material calculator or contact us for an exact figure based on your planned depth.

Coverage depends on depth. One ton of compacted fill dirt is roughly 0.8 to 1.0 cubic yards depending on moisture and soil type; that covers about 36 to 48 sq ft at 3 inches deep. For planning in Scranton, use cubic yards for volume and ask Hello Gravel to convert to tons for delivery.

You can place gravel over fill dirt, but only after proper preparation: remove organic topsoil, compact the fill dirt in lifts, and ensure good drainage. Without compaction and a stable subgrade, the gravel will settle and rut. For driveways or pathways in Scranton, consider a geotextile and a compacted crushed-stone base over the fill dirt for best results.

Yes, most uses of fill dirt require compaction to prevent settlement, especially under buildings, patios, or driveways. Compact in 4- to 8-inch lifts with a plate compactor, roller, or similar equipment and check local code or engineer requirements for structural work. Hello Gravel drivers can drop material; compaction and spreading are typically the customer's responsibility, though drivers may tailgate-spread at their discretion.

A full-size pickup truck bed can hold about 1 cubic yard of loose material in volume, but the truck's payload limit often prevents safely hauling a full yard of wet, heavy fill dirt. Because of weight and safety, for more than a small amount we recommend ordering delivery from Hello Gravel rather than relying on a pickup.

For a 20 ft long driveway, coverage depends on width and desired raise. Example: a 20 ft by 10 ft driveway raised 4 inches needs about 2.5 cubic yards (roughly 3 tons), which matches Hello Gravel's 3-ton minimum. Note: fill dirt is for grading/subgrade; you still need a compacted stone base or surface material for the driveway itself.

The most cost-effective option is to reuse onsite material from cuts when possible (cut-and-fill) to minimize bought fill. Otherwise, source local suppliers to reduce haul distance and order the minimum needed (Hello Gravel minimum is 3 tons). Get several quotes and consider renting small equipment to spread and compact the material yourself to save labor costs.

One cubic yard is a cube 3 ft on a side (27 cubic feet). It will cover about 100 sq ft at 3 inches depth. Weight varies by moisture and composition, but expect roughly 2,000 to 2,700 lbs per cubic yard in the Scranton area, so plan delivery by truck rather than hauling many yards in a small pickup.