Gravel in Conway, SC

For Conway and the Myrtle Beach coast, use angular, crushed stone with a stable base: a compacted 4-6 inch layer of crusher-run or dense grade aggregate (DGA) topped with 1-2 inches of 3/4u0022 or #57 crushed stone. These angular stones lock together and drain better than rounded river rock, which helps resist washout in heavy rain. Add a geotextile fabric and proper grading to direct water away from the driveway to reduce erosion.

For a typical single-car driveway in Conway, plan on a 4-6 inch compacted base of crusher-run or crushed stone plus 2-3 inches of surface stone for a durable finish. If you expect heavier vehicles or poor soils, increase the compacted base to 6-8 inches. Proper compaction and drainage are as important as depth in the coastal climate.

You can lay gravel over compacted, well-draining dirt for short-term or decorative uses, but for a lasting driveway you should install a crushed stone base and consider geotextile fabric. Fabric helps prevent base material from mixing with native sandier soils common in Horry County and reduces settling. A base of 4-6 inches of crusher-run plus a surface layer will perform much better over time than gravel laid directly on dirt.

Costs vary with material choice, depth, and contractor rates, but a small single-car driveway (about 20 ft by 10 ft) often ranges from a few hundred dollars for materials and DIY installation to $1,000-$3,000 with professional installation. Local factors in Conway such as access, required grading, and permit or HOA needs will affect the total. Use Hello Gravel’s calculator and get a quote for an accurate, location-specific price.

Near Myrtle Beach prices vary, but crushed gravel delivered typically ranges roughly $30-$70 per ton; a tri-axle truckload (about 10-12 tons) can cost approximately $300-$840 delivered depending on material and distance. A small 20 ft by 10 ft driveway usually requires under one truckload — often about 2-3 cubic yards (roughly 3-4 tons) depending on depth — so you may meet our 3-ton minimum but not need a full tri-axle’s worth. Check your zip code on our site for exact local pricing and truck availability.

For a 20 ft by 10 ft driveway: 2 inches deep requires about 1.25 cubic yards; 3 inches about 1.85 cubic yards; and 4 inches about 2.5 cubic yards. Four cubic yards will cover approximately 648 square feet at 2 inches deep, 432 square feet at 3 inches, or 324 square feet at 4 inches. Use the formula (length x width x depth inches) / 324 to calculate cubic yards for other sizes.

Two inches is generally too thin for a driveway in Conway’s climate and soils; it’s suitable only as a light top dressing. For lasting performance, plan on a compacted base of 4-6 inches plus a 2-3 inch surface layer, especially where heavy rain or periodic flooding may occur. Ordering a bit more than the minimum helps account for settling and spreading.

'Type 4' can mean different mixes by supplier, but it often refers to crushed stone with a range of sizes and some fines used for base or shoulder work. It can be suitable as a base layer or for drainage features if your local supplier specifies it as road base or drain rock, but it may not be the ideal top surface for a driveway. Confirm the exact gradation with your Hello Gravel quote and opt for angular surface stone (like #57) for the finish layer if you need good drainage and traction.

Yes, Hello Gravel delivers to Conway using contracted dump truck fleets (typically tri-axle trucks). Our minimum order is 3 tons; standard delivery lead time is 2+ business days, and next-day delivery is available for orders placed before noon CST for an extra fee. Drivers may offer tailgate spreading at their discretion but it is not guaranteed; check your zip code at checkout for exact truck access limits and pricing.

Permit and HOA rules vary across Conway and nearby neighborhoods, so check with the City of Conway planning/building department and your HOA before installing a gravel driveway. Hello Gravel does not automatically obtain permits, but our sales team can advise on common local requirements and connect you with contractors who handle permit-related work. Always confirm approvals before scheduling delivery to avoid rework or delays.