Fill-dirt in Batesburg-Leesville, SC

Local delivered fill-dirt prices in the West South Carolina area typically range from about $10 to $25 per cubic yard, or roughly $8 to $20 per ton, depending on moisture, particle size, and haul distance. Batesburg-Leesville rates can fall toward the lower end of that range because of local suppliers, but exact cost varies by supplier and delivery details; get an instant quote on our site for a firm price.

A loose cubic yard of typical fill-dirt in this region usually weighs about 2,200 to 2,800 pounds (about 1.1 to 1.4 tons). Expect a compaction or settlement factor of roughly 1.1 to 1.3 (you may need 10% to 30% extra loose material to achieve the finished compacted volume). For critical pads or floor slabs, order based on an engineered compaction spec or ask your supplier for a site visit.

Hello Gravel connects you with local Lexington County suppliers and haulers that deliver fill-dirt via dump trucks, typically tri-axle rigs. We set up delivery windows, have a 3-ton minimum, and can show available material options and delivery fees for your zip code; drivers may offer tailgate spreading at their discretion but it is not guaranteed.

Ordinary fill-dirt is sometimes used to raise low spots, but it is not the best finish surface on clay-heavy sites typical of West South Carolina. Clay soils and fine fill can hold water and rut under traffic; for driveways use crushed stone or road base over a properly compacted subgrade, and for building pads use engineered fill and compaction testing to avoid future settlement.

A driveway made of plain fill-dirt will require regular grading, regrading after heavy rains, and added material to fill ruts and erosion spots; expect frequent upkeep during the first few years. Without a stone or crushed surface it may only perform acceptably for a few seasons under regular vehicle traffic; applying crushed stone or a stabilizing surface greatly increases lifespan and reduces maintenance.

Small residential fills and deliveries are often allowed without permits, but larger grading, changes to drainage, work near wetlands, or projects that disturb over an acre usually require permits and possibly engineered plans. Check with Lexington County Planning and Permitting and the Town of Batesburg-Leesville for thresholds and stormwater/erosion-control rules before ordering large volumes.

Fill-dirt is inexpensive and good for raising low areas or backfill, but it compacts poorly for surfaces and can retain water in our humid subtropical climate. Crushed stone and engineered road base are better choices for driveways and erosion control because they drain, lock together when compacted, and resist rutting. Clean fill (no organics) is useful when you need stable subgrade material; choose based on the end use and drainage needs.

Deliveries are usually made by tri-axle dump trucks carrying about 10 to 12 cubic yards (roughly 12 to 16 tons depending on material). Hello Gravel has a 3-ton minimum order; contractors commonly order full truckloads for larger jobs. For compaction, contractors use plate compactors, vibratory compactors, or small rollers; homeowners can rent a plate compactor for small areas but hire professionals for larger, critical fills.

Measure the area (length x width) and the desired fill depth in feet, multiply to get cubic feet, then divide by 27 to get cubic yards. Add 10% to 30% extra to account for compaction and settlement (use 15% for typical residential leveling, more for loose or clayey fill). If you prefer, use Hello Gravel's material calculator or contact our team with site details for a quick estimate and quote.