Gravel in South Pottstown, PA

Expect a range rather than a single price: common crushed stone (#57, 3/4u0022) typically runs about $25 to $45 per ton at the supplier, pea gravel about $30 to $60 per ton, and screenings or recycled material $18 to $35 per ton. When spread, per-square-foot costs depend on depth: a 2u0022 decorative layer is roughly $0.40 to $1.50 per sq ft in material only, while a compacted 3u0022 to 4u0022 driveway surface usually runs about $0.90 to $2.50 per sq ft for material. Delivery and spreading can add fees or be free depending on supplier and distance, and Hello Gravel has a 3-ton minimum on orders.

Local suppliers typically stock crushed stone (#57, 3/4u0022), pea gravel, river rock, screenings (crusher fines), and recycled aggregates. Use #57 and 3/4u0022 crushed stone for driveways and drainage because they lock together and shed water; pea gravel is best for patios, walkways, and decorative areas where a smooth look is desired; screenings are used as a compactable base or to fill joints. Regional geology means color and texture vary, so ask for photos or notes in your order if color matters.

Crushed, angular stone (like #57 or 3/4u0022) drains well and resists frost heave better than loose rounded pea gravel because the pieces interlock and allow water to move away. Pea gravel and rounded stone can shift or rut with repeated freeze and thaw unless contained with edging and a stable base. Screenings can solidify when frozen but may become soft and rut in wet thaws; to reduce problems use proper base layers, compaction, geotextile fabric, and good site drainage.

Measure the area in square feet, convert desired depth to feet (inches divided by 12), multiply area by depth, then divide by 27 to get cubic yards. For a quick ton estimate, multiply cubic yards by about 1.3 tons per cubic yard (material-dependent) or ask our material calculator for a precise number. Example: a 20' x 50' driveway at 4u0022 depth is 1,000 sq ft x 0.333 ft / 27 = about 12.3 cubic yards, roughly 16 tons.

Approximate quantities vary by depth and driveway width: a narrow 1-car driveway (10' x 30') at 3u0022 depth needs about 3 to 4 tons, while a standard 2-car driveway (20' x 50') at 3u0022 to 4u0022 depth needs about 10 to 20 tons. If you are adding a compacted base layer (4u0022 to 6u0022) plus a surface course, plan on the higher end of the range or order extra to avoid shortfalls. Use our calculator or contact the team with your dimensions to get a tailored estimate.

Many local quarries, landscape supply yards, and municipal aggregate dealers serve the South Pottstown area; Hello Gravel connects you with trusted local suppliers and haulers in your zip code. Minimum delivery requirements vary by supplier, but Hello Gravel’s minimum order is 3 tons and most dump-truck deliveries use tri-axle trucks that require good access. Check availability for your exact address on our site or call our team to confirm supplier options, delivery fees, and next-day availability.

Permitting rules vary by borough, township, and any applicable homeowners association. Small repairs or resurfacing often do not require a permit, but changes to curb cuts, driveway width, stormwater runoff, or impervious surface limits might. Before you start, contact South Pottstown borough office or your township code enforcement and check for HOA rules to confirm if a permit, inspection, or specific setback is required.

Have a clear drop location free of low-hanging wires, parked cars, and obstacles; tri-axle dump trucks need room to back or turn and may not be able to access steep or narrow lanes. Request tailgate spreading at checkout if you want it, but note drivers perform spreading only at their discretion and there are no guarantees. For best results in freeze–thaw climates, ask for compaction-ready material, plan staging away from drainage low spots, and let the driver know any access issues before delivery.