Fill-dirt in Riverside, PA

Prices vary by supplier, distance, and whether the material is screened or contains organics. In West Pennsylvania, a single tri-axle truckload (about 10–14 cubic yards loose) of fill dirt typically ranges from roughly $300 to $1,200 delivered to Riverside, PA, with most residential loads falling in the lower-to-middle part of that range. Hello Gravel requires a minimum order of 3 tons and will give a specific quote based on your zip code and delivery location.

Use cubic yards = area (sq ft) x depth (in) / 324 to estimate volume. For 1,000 sq ft: 2u0022 ≈ 6.2 yd3 (≈ 8 tons), 4u0022 ≈ 12.4 yd3 (≈ 16 tons), 6u0022 ≈ 18.5 yd3 (≈ 24 tons). Delivered costs in West Pennsylvania often run about $15–$45 per cubic yard for fill dirt, so expect a delivered price range roughly $90–$830 depending on depth, supplier, and site access.

Fill dirt can be used to raise or grade the subgrade for a driveway, but it is not a finished wearing surface; you should install a compacted gravel base and surface material on top for a durable driveway. For a 20 ft long by 12 ft wide driveway at 6u0022 of fill, you need about 4.4 cubic yards (≈ 6 tons) of fill dirt—material and delivery for that amount in West Pennsylvania usually runs in the low hundreds of dollars. For lasting performance in Riverside soils, plan on additional crushed stone (base) and compaction, which adds material and labor costs.

Fill dirt is generally less expensive than gravel per cubic yard because it is unprocessed and often sourced locally; typical West Pennsylvania delivered ranges are about $15–$45 per cubic yard for fill dirt versus about $25–$60 per cubic yard for decorative or crushed gravel. Exact pricing depends on rock content, screening, moisture, and haul distance—contact Hello Gravel for competitive local quotes.

For general lawn leveling or building up low spots, you can place fill dirt directly over native soil, but you should place it in thin lifts (4–6 inches) and compact each lift to reduce settling. For driveways, patios, or areas with poor drainage (Riverside often has clayey pockets), install and compact a proper aggregate base first to ensure drainage and load-bearing capacity. Always avoid burying organics and remove topsoil if you need a stable structural fill.

Most residential deliveries to Riverside use tri-axle dump trucks that carry about 10–14 cubic yards loose (roughly 12–18 tons of fill dirt, depending on moisture). Hello Gravel’s minimum order is 3 tons, standard delivery is scheduled for 2+ business days, and next-day delivery is available for orders placed before noon CST for an additional fee; delivery fees depend on supplier distance and access and may be included or added to the material price in your quote. Drivers may be able to tailgate spread at their discretion—request it at checkout but note there are no guarantees.

Yes—Hello Gravel connects you with local suppliers who typically deliver within our standard 2+ business day window, and next-day delivery is sometimes available for orders placed before noon CST with an extra fee. Minimum order sizes are generally small for residential jobs—Hello Gravel’s minimum is 3 tons—but some local suppliers may have higher minimums for short runs or special materials. For the fastest service, provide clear delivery instructions and book early to secure preferred dates.

Fill dirt is commonly used to level yards and fill low spots, and it works well in Riverside for modest elevation adjustments. Calculate the needed volume (area x depth / 324), then add 10–20% extra for compaction and settling—for example, filling a 1,000 sq ft area by 1u0022 needs about 1.85 yd3, so order ~2–2.2 yd3 to be safe. If your yard has poor drainage or organics in the soil, consider using clean fill and compacting in layers or contact Hello Gravel for a site-specific recommendation.

Measure the area in square feet and decide the average depth in inches, then use cubic yards = (area x depth in inches) / 324. Round up and add 10–20% for compaction and settling, and remember 1 cubic yard of fill dirt is roughly 1.2–1.4 tons (varies with moisture and composition). You can use Hello Gravel’s material calculator or call our team with your area, desired depth, and zip code for a quick, local estimate.