Fill-dirt in Lower Burrell, PA

Prices vary by supplier, truck access, and current local supply. In West Pennsylvania fill-dirt delivered to Lower Burrell commonly runs in the range of about $10 to $30 per ton (roughly $12 to $36 per cubic yard), but exact pricing depends on your zip code, delivery distance, and truck size. Use our checkout or call our team for an accurate, up-to-date quote for your address. Hello Gravel requires a 3-ton minimum order and shows delivery options and fees at checkout.

Truck sizes vary by supplier and site access. A standard tri-axle dump truck typically carries about 12 to 16 cubic yards of loose fill-dirt (roughly 13 to 20 tons depending on moisture and material density), while smaller single-axle trucks or 7x14 trailers usually hold about 6 to 8 cubic yards (about 7 to 10 tons). Your confirmed delivery ticket will list the truck type; tell us about tight driveways or low-clearance areas so we can match a suitable truck.

Calculate volume with: length x width x depth (all in feet), then divide by 27 to get cubic yards. Example: a 20x20 pad at 6 inches deep is 20 x 20 x 0.5 = 200 cubic feet, or about 7.4 cubic yards (roughly 8.5 to 9.5 tons). For a 100-foot driveway multiply the driveway width by 100 and the desired depth, then divide by 27 for cubic yards; contact us with your exact dimensions and desired compaction depth and we will provide a delivery quote.

Fill-dirt can be used for general grade adjustments or raising low spots, but it is not usually the best final base under pavement because it may contain fines and organic material that settle over time. For driveways we typically recommend a compactable aggregate such as crushed stone or crusher run as the structural base; some local suppliers can deliver fill that is graded and compacted on-site at additional cost, while others can deliver loose fill only. Ask for engineered or compacted-fill options if you plan to pour concrete or install pavement, and consider hiring a local compaction contractor for testing and pass counts.

Costs depend on material price, truck size, and whether spreading or compaction is required. Using a delivered price range of $10 to $30 per ton, a 20x20 pad at 6 inches (about 9 tons) would cost roughly $90 to $270 for material alone, plus any delivery or spreading fees; a longer driveway cost scales with volume. Tailgate spreading may be available at the driver’s discretion but is not guaranteed; for professional spreading and compaction expect additional contractor fees—request a detailed quote through our site for an exact figure.

Common issues include settlement, poor drainage, and the presence of organic material that decomposes and causes sinking. For areas that will carry loads or receive pavement, stronger, well-graded aggregates like crushed stone, crusher run, or compacted engineered fill are recommended. If you need aesthetic topsoil, order screened topsoil for planting beds rather than fill-dirt; our team can suggest alternatives based on your project and local soil conditions.

A 50 lb bag contains 50 pounds, so one ton (2,000 lb) equals about 40 bags; because a cubic yard of loose fill-dirt typically weighs about 1.1 to 1.25 tons, expect roughly 44 to 50 50-lb bags per cubic yard. Bagged fill-dirt is less common for bulk landscape projects but may be available from local retailers; Hello Gravel specializes in bulk truck delivery but can advise on nearby bagged options if you need small quantities.

Many local suppliers and haulers have minimum order sizes or small-order surcharges. Hello Gravel’s platform shows available pricing and requires a 3-ton minimum; some suppliers may apply a short-distance fee or minimum for very small loads. When you enter your zip code we display the available suppliers, their minimums, and any delivery charges so you can see if a small-order fee applies.

Fill-dirt can be compacted, but its suitability as a structural base depends on its composition and the compaction achieved. For structural work under concrete or pavement, contractors usually specify engineered fill and a required compaction percentage; some local vendors can deliver compacted or pre-graded fill, but mechanical compaction on-site is typically done by a contractor with a compactor. Ask your project engineer or our team about compaction specs and we can connect you with suppliers or local compaction contractors in the Lower Burrell area.

Common delivery trucks include tri-axle dump trucks (about 12 to 16 cubic yards), single-axle dumps (about 6 to 8 cubic yards), and smaller 7x14 trailer deliveries for tight access. Larger trucks usually lower the per-ton delivery price but need more room to maneuver and higher-clearance driveways; smaller trucks cost more per ton but can access confined properties. Tell us about gates, low wires, or narrow lanes when you order so we can select the appropriate truck and provide an accurate price.