Gravel in Kingston, PA

A typical tri-axle dump truck used by our suppliers carries about 12 to 14 tons of gravel, which is the common truck size in Kingston and surrounding West Pennsylvania. Hello Gravel lists material and delivery pricing at checkout for your zip code; our platform minimum order is 3 tons and we can give an exact quote when you enter your address.

One ton of gravel is roughly 0.7 cubic yards and will cover about 90 to 120 square feet at a 2-inch depth, depending on the gravel type and how compacted it is. For Kingston projects with freeze-thaw cycles, plan toward the higher end of that range if you need heavier compaction or coarser stone.

Buying by the ton and having it delivered is almost always cheaper than buying many 50 lb bags. Use Hello Gravel to compare local supplier prices, check for free delivery in your area, and order the minimum 3 tons or more to get the best per-ton price.

A 50 lb bag of gravel contains about 0.5 cubic foot of material, which covers roughly 3 square feet at a 2-inch depth or about 6 square feet at a 1-inch depth. For larger Kingston jobs it’s more economical to order by the ton rather than buying many small bags.

Cost varies with length, depth, gravel type, and delivery; instead of a fixed price, calculate material needs first. For example, a 20 ft wide by 50 ft long driveway (1,000 sq ft) at 3 inches depth needs about 9.3 cubic yards (roughly 13 tons); get a firm material and delivery price by entering your Kingston zip code on Hello Gravel.

For light foot traffic or a short-term surface in Kingston, 2 inches may be acceptable, but it is usually too thin for vehicle traffic. We recommend a compacted base of 4 to 6 inches of crushed stone and a 1 to 2-inch top layer for a durable driveway that handles freeze-thaw cycles common in West Pennsylvania.

That depends on the driveway width and depth. For a typical single-car driveway 10 ft wide and 40 ft long at 3 inches depth, you need about 3.7 cubic yards (around 5 tons); use Hello Gravel’s calculator or enter your dimensions at checkout for a precise quantity tailored to Kingston conditions.

A 7x14 dump trailer typically carries about 2.5 to 4 cubic yards of loose gravel, depending on the side height and how full it’s loaded. For Kingston deliveries our truck options are usually tri-axle dump trucks; if you’re using a trailer, confirm the exact capacity with your hauler before loading.

With proper base preparation, drainage, and occasional maintenance, a gravel driveway or path in Kingston can last many years; a solid crushed-stone base can remain stable for decades while the top layer may need refreshing every 1 to 5 years. Expect more frequent upkeep in West Pennsylvania because freeze-thaw cycles and road salt can move material and create ruts.

Recycled crushed concrete, reclaimed asphalt, and crusher-run (stone with fines) are often less expensive per ton and can compact to a firm surface. Each option has trade-offs for drainage, appearance, and longevity in Kingston’s climate, so we recommend comparing samples and getting a local quote through Hello Gravel.

Prices vary by material, depth, and delivery, so instead of a per-foot price we provide a quantity method: calculate cubic yards needed (length x width x depth) and multiply by the per-ton or per-yard price shown at checkout. For a 100 ft by 12 ft driveway at 4 inches depth you’ll need about 14.8 cubic yards (roughly 21 tons); enter your Kingston address for a precise quote.

No gravel hardens like poured concrete, but mixes with fines—such as crusher-run or dense-graded aggregate—can compact into a very firm, interlocked surface. Those compacted materials give a hard, stable base suitable for driveways, but they are not structural like concrete and may require periodic regrading and compaction in Kingston’s freeze-thaw conditions.

A common tri-axle load of 12 to 14 tons will cover roughly 1,100 to 1,700 square feet at a 2-inch depth, depending on the exact tonnage and stone size. To get the exact coverage for your Kingston project, tell us the desired depth and stone type and we’ll calculate how many truckloads you need.

One cubic yard equals 27 cubic feet, and a typical 50 lb bag of gravel is about 0.5 cubic foot, so you need approximately 54 bags to make one cubic yard. For most Kingston projects buying bulk by the yard or ton is easier and more economical than handling dozens of bags.

The best base is a well-draining, compacted layer of crushed stone (for example 3/4u0022 crushed stone or crusher-run) of 4 to 6 inches for driveways, with geotextile fabric underneath where poor soil or frost heave is a concern. Proper slope and drainage are especially important in Kingston to prevent water from pooling and causing frost-related movement.