Fill-dirt in Denver, PA

Delivered fill dirt prices in the Denver, PA area typically range from about $20 to $40 per cubic yard, depending on supplier, distance, and material quality. A single dump truck load (tri-axle, roughly 8-12 cubic yards) often runs between $200 and $480 delivered. Prices can vary by zip code and season, so use our quote tool or call Hello Gravel for an exact delivered price to your address.

Costs depend on driveway length and required depth. For example, a 20 ft by 50 ft drive (1,000 sq ft) raised 4 inches needs about 12.4 cubic yards of fill dirt; at $20-$40/yd3, materials and delivery would be roughly $250-$500. Add $200-$600 for grading and compaction if you hire local equipment operators; note that fill dirt alone is not a durable driving surface and you should plan a stone subbase before finishing with gravel.

Use this quick formula: cubic yards = (area in sq ft * depth in inches) / 324. For example, a 50 ft by 40 ft backyard (2,000 sq ft) raised 2 inches needs about 12.3 cubic yards. With local prices of $20-$40/yd3, delivered fill dirt would cost about $250-$500, and basic spreading/compaction by a contractor typically adds $150-$500 depending on access and equipment.

Most suppliers in the region provide delivery by dump truck; tailgate spreading may be available at the driver’s discretion but is not guaranteed. Full spreading and mechanical compaction are usually offered by separate local contractors rather than the material hauler; fees vary by scope but expect anything from $150 for a small, simple spread to $500+ for larger or difficult jobs. Ask Hello Gravel to add order notes about spreading and we can flag suppliers, but plan on hiring a landscape or excavation contractor for guaranteed compaction.

Per cubic yard, clean fill dirt is usually cheaper than crushed stone. However, fill dirt does not provide the drainage, load-bearing strength, or long-term durability needed for driveways, so crushed stone or a properly designed aggregate subbase will perform far better. For durability in Denver, PA conditions, invest in a stone subbase and use fill dirt only for grading or leveling where appropriate.

You should not rely on fill dirt alone for a driveway. Best practice is to remove soft topsoil, install geotextile fabric where needed, and build a compacted stone subbase before any surface gravel. Suppliers often sell geotextile fabric and stone, but installation of fabric, subbase and compaction is typically performed by contractors rather than the material hauler; Hello Gravel can source the materials and connect you with local pros.

For driveways in this region, use fill dirt only for grade adjustments; for structural support, plan on a compacted stone subbase of 4 to 6 inches for cars and 6 to 12 inches for heavy loads, plus 1 to 3 inches of surface gravel. Fill dirt depths vary by need but are usually 2 to 6 inches for leveling. Hello Gravel can calculate quantities for any specified area and depth through our material calculator and provide delivered quotes to your zip code.

Fill dirt is almost always sold and delivered in bulk by the cubic yard or ton rather than in 50-lb bags. Hello Gravel has a 3-ton minimum order in many areas; for small projects contractors often sell leftover topsoil or screened soil in bags, but for true fill dirt bulk delivery is the standard and most cost-effective option. Contact us for minimums and delivery options to Denver, PA.

No — straight fill dirt does not harden like concrete. Materials that harden or bind (for example, stabilized crusher fines or polymer-stabilized aggregates) are different products and may be stocked by local suppliers. If you need a surface that behaves like hardened material, ask Hello Gravel about stabilized aggregates and recycled mixes available in the West Pennsylvania market; we can quote those materials separately.

Price depends on required depth. For an example, covering 1,000 sq ft by 2 inches requires about 6.2 cubic yards; at $20-$40/yd3 delivered, material costs would be about $125-$250. Adding basic spreading/compaction by a contractor commonly brings the total to roughly $300-$800, depending on access, depth, and local labor rates; request a site-specific quote from Hello Gravel for an exact price.