Stone in Dallas, PA

Crushed stone is rock mechanically crushed to angular pieces, while gravel is naturally rounded stone collected from riverbeds or pits. In Dallas, PA, local suppliers often sell crushed limestone, bluestone, or trap rock for construction uses and rounded river gravel for decorative uses. For driveways and bases you will usually want crushed stone because the angular pieces lock together and compact better.

Stone that includes fine particles, such as crusher run (also called 3/4u0022 minus or dense grade aggregate), will compact into a firm, almost concrete-like base. Crusher run mixes coarse stone with stone dust so particles bind under compaction, making it a common base for driveways and patios in the Dallas area. Keep in mind freeze-thaw in northeastern Pennsylvania means you still need proper drainage and compaction to avoid heaving.

Crushed stone is often slightly more expensive than unprocessed natural gravel because it requires quarrying and crushing, but regional supply and quarry distance drive prices. In and around Dallas, PA, local quarries typically keep hauling costs lower than farther-away sources, so final price depends on local availability and delivery. Get a quote through Hello Gravel to see the delivered cost to your zip code.

For a 20 ft long by 10 ft wide driveway at a 3u0022 depth you need about 1.9 cubic yards, which is roughly 3 tons of crushed stone — matching Hello Gravel's 3-ton minimum. Material-only costs in northeastern Pennsylvania commonly range, so expect materials to be a few hundred dollars and total installed cost to vary based on delivery and labor. For an accurate price, request a quote with your driveway size and desired depth.

A 50 lb bag of crushed stone is about 0.018 cubic yards and will cover roughly 6 sq ft at a 1u0022 depth (about 3 sq ft at 2u0022 depth). That makes 50 lb bags convenient for small accents, planters, or patching, but bulk delivery is more economical for larger areas in Dallas. Use bulk orders for driveways and larger landscaping beds to meet the 3-ton minimum and lower your per-ton cost.

The u002220/30/40u0022 concept is a gradation guideline sometimes used by contractors to describe a mix of fine, intermediate, and coarse aggregate sizes to reduce voids in concrete. For homeowners in Dallas needing stone for landscaping or bases, you don't usually apply that rule directly — instead choose the product specified by your contractor or supplier (for example, 3/4u0022 crushed stone for base, crusher run for compacted bases). If you are ordering stone for concrete mixes, follow the ready-mix or structural engineer specifications rather than a general rule of thumb.

Angular crushed stone and mixes with fines (crusher run, 3/4u0022 minus, or dense grade aggregate) compact best because the sharp edges lock together and fines help bind the mix. Rounded river gravel or pea gravel does not compact as well and can shift under traffic, making it less suitable for a structural base. For a durable driveway in Dallas, ask for crushed stone with fines and plan for compaction with a plate compactor or roller.

Multiply length by width by depth (in feet) to get cubic feet, then divide by 27 to convert to cubic yards; multiply cubic yards by the local conversion (about 1.4 to 1.6 tons per cubic yard for crushed stone) to get tons. For example, a 10 ft by 10 ft area at 2u0022 depth is 10*10*(2/12)=16.7 cu ft, or 0.62 cu yd, which equals about 0.9 to 1.0 tons. If you need help, use Hello Gravel's material calculator or request a quote — our minimum order is 3 tons for delivery in the Dallas area.