Fill-dirt in Cranberry, PA

Delivered fill-dirt prices in the West Pennsylvania region, including Cranberry, typically range from about $12 to $25 per ton (roughly $15 to $40 per cubic yard), depending on moisture, local availability, and haul distance. Prices can change seasonally and by supplier, so check your zip code on Hello Gravel for exact, up-to-date quotes for your address.

Hello Gravel’s minimum order is 3 tons, which is typical for local suppliers and tri-axle deliveries serving Cranberry. Standard delivery lead time is 2+ business days, with a next-day option available for orders placed before noon CST in many areas; confirm timing at checkout.

For driveway bases in Cranberry’s freeze-thaw conditions, place fill-dirt in 4- to 6-inch lifts and achieve at least 90-95% relative compaction (standard Proctor) for structural stability. Use moisture conditioning as needed and compact each lift with a plate compactor for small areas or a vibratory roller for larger runs; consider using granular aggregate instead of pure fill-dirt where frost susceptibility is a concern.

Fill-dirt densities vary with moisture and composition, but a practical conversion for Cranberry mixes is about 1.2 to 1.6 tons per cubic yard. Ask your supplier for their specific weight if you need exact numbers for ordering or permitting.

Pure fill-dirt (lots of fines or organic material) is more prone to frost heave and poor drainage in Cranberry’s freeze-thaw conditions. For areas exposed to frost you should use well-graded granular material or place a layer of clean gravel beneath the fill, improve site grading, and install drainage as needed to reduce frost-related movement.

Small residential deliveries usually do not require special permits, but large imports or long-term stockpiles may trigger local zoning, building, or erosion-control rules. Check with Cranberry’s municipal office and the county conservation district, and ensure truck access complies with PennDOT or local road weight/overweight rules before ordering large loads.

Fill-dirt is generally less expensive but less stable than crusher run or DGA; it compacts less predictably and can settle or hold water in freeze-thaw cycles. For driveways in Cranberry, crusher run/DGA provides better load-bearing, drainage, and long-term performance; use fill-dirt only for non-structural raises or when covered by a proper granular base.

Compacted fill-dirt used for non-structural yard fill will usually settle somewhat in the first 1 to 3 years and often needs periodic top-ups and regrading. For driveways or load-bearing areas, expect more maintenance and consider switching to a granular base to reduce ongoing repairs.

One cubic yard covers about 324 square feet at 1u0022 depth. To raise 1,000 sq ft by 1u0022 you need about 3.1 cubic yards (roughly 3.7–5.0 tons); for 3u0022 about 9.3 yd3 (11–15 tons); for 6u0022 about 18.5 yd3 (22–30 tons), using a typical conversion of 1.2–1.6 tons per cubic yard—confirm with your supplier for exact tonnage.

Many suppliers and drivers will offer delivery and may provide tailgate spreading at their discretion if it is safe and feasible, but spreading is not guaranteed and often not included. Mechanical compaction is usually not bundled; customers typically hire separate equipment or a contractor for compaction—ask Hello Gravel at checkout to note spreading requests and check local supplier services.

Measure your area carefully and use the cubic yard and ton conversions when comparing quotes, and always add 5-10% extra for settlement and variance. Note delivery instructions (driveway access, drop zone) in your order, request photos of material if color/texture matters, and contact Hello Gravel or the supplier early if you need spreading or compaction so you can plan for additional services.