Fill Dirt in Bixby, OK

Typical delivered prices for fill-dirt in the Bixby area usually run between $15 and $35 per ton, depending on haul distance, quantity ordered, and local supplier rates. Hello Gravel has a 3-ton minimum and often shows clear delivery fees during checkout; free delivery may be available in some zones. For an exact quote, enter your zip code or contact our team to factor in truck access and schedule.

Hello Gravel connects you with local suppliers and contracted haulers in the Bixby/West Oklahoma area, so bulk pricing reflects local geology and truck routing. Suppliers price by the ton or cubic yard and give discounts for larger loads; remember our minimum order is 3 tons. Get a detailed quote on the site to see material cost, delivery fee, and any added services like tailgate spreading.

Estimate the cubic yards needed by multiplying area (feet) by depth (feet) and dividing by 27 to get cubic yards, then convert to tons using about 1.2 tons per cubic yard for typical fill-dirt. Example: a 12' x 40' driveway at 6u0022 depth is about 8.9 cubic yards, or ~10.7 tons; a 20' x 20' foundation backfill at 2' depth is ~29.6 cubic yards, or ~35.5 tons. Always buy a little extra (5-10%) to account for compaction and grading.

For Bixby’s clay-prone soils and freeze-thaw cycles, choose clean, low-organic structural fill with a well-graded sand-clay mix that compacts well and sheds water. Avoid high-organic topsoil as structural fill; consider engineered or granular fill for sensitive areas. Proper compaction in 6u0022 lifts and attention to drainage will reduce settling and freeze-thaw damage.

A properly compacted fill-dirt base with a finished layer of crushed rock or gravel can provide a stable subgrade for many years, but pure dirt surfaces will rut and require more upkeep. Expect to add or regrade surface rock every 2-5 years depending on traffic and drainage. Regular maintenance of drainage (gutters, swales) and occasional re-compaction after wet seasons will extend longevity.

Minor grading for yard leveling often does not require a permit, but significant changes to lot grade, retaining walls, or anything that alters stormwater runoff usually need city or county approval. Bixby may have local rules or HOA restrictions, so check with the City of Bixby Building/Planning department before large fills to avoid drainage or floodplain issues. When in doubt, get written guidance from the city or a local engineer.

Contractor rates in the Bixby area vary, but plan for labor and compaction costs roughly in the range of $30 to $75 per hour for small jobs, or about $3 to $10 per cubic yard if the contractor bills by volume for straightforward spreading and compaction. Larger or complex jobs needing a plate compactor, roller, or skilled grading can push costs higher; expect equipment rental or operator charges to be added. Ask contractors for line-item estimates for spreading, compaction, and final grading.

Use fill-dirt when you need structural bulk to raise grade or backfill—it compacts well and is not intended for planting. Choose topsoil when you plan to grow plants or grass because it contains organic matter and nutrients. For drainage and stable driveways, use crushed rock or gravel as the finished surface and a compacted fill-dirt subgrade; crushed aggregate provides better drainage and wear resistance than bare fill-dirt.

Order at least the 3-ton minimum and use our material calculator to estimate quantities; add 5-10% extra for compaction and grading. Schedule delivery on a dry day if possible, note access restrictions in Order Notes, and request tailgate spreading if you want the driver to attempt it (subject to their discretion). If you have unusual drainage or permit questions, contact our team or a local engineer before delivery.