Fill Dirt in Dublin, OH

Yes, fill dirt is generally cheaper than decorative gravel in Dublin because it is less processed and often sourced locally. Expect lower per-unit prices for fill dirt, but final cost depends on delivery distance, source type (native vs. select fill), and any screening or contamination testing required.

Prices vary, but in Dublin you can typically expect about $12 to $30 per cubic yard delivered for common fill dirt, depending on source and truck access. Because soil weight varies, that converts roughly to $10 to $25 per ton; exact pricing will be shown in your Hello Gravel quote.

A tri-axle dump truck load (about 10 to 14 cubic yards) in the Dublin area commonly costs between $150 and $400, depending on material type and haul distance. Hello Gravel shows delivery and material charges up front, and our minimum order is 3 tons if you need a smaller amount.

A tri-axle dump truck used by local haulers usually carries about 10 to 14 cubic yards, which for fill dirt is roughly 12 to 20 tons depending on moisture and soil density. Local weight limits and the specific truck used can change that number, so your Hello Gravel order confirmation will list the expected load size.

One ton of fill dirt is roughly 0.7 to 0.8 cubic yards. That will cover about 230 to 260 square feet at 1-inch depth, about 75 to 85 square feet at 3-inch depth, or about 25 to 30 square feet at 9-inch depth; adjust for compaction when planning.

Maybe, but it depends on your truck's payload rating; many half-ton pickups cannot safely carry a full ton in the bed. We recommend checking your vehicle's payload and, for safety and convenience, using Hello Gravel's delivery service (minimum 3 tons) or a small dump truck hire instead of risking overloading a pickup.

You can add fill dirt to raise grade or fill low spots, but it should be placed in layers and compacted to reduce future settlement. If adding over gravel or poorly draining soils common in the Dublin area, consider a geotextile or proper drainage and follow compacting steps; for planting tops use a layer of topsoil over the fill dirt.

Late spring through early fall is generally best for placing and compacting fill dirt in Dublin because ground is less likely to be frozen and machines can operate more reliably. Avoid very wet periods (which increase settling and hauling cost) and be cautious in winter when frozen ground can complicate grading.

Native or 'clean' fill (on-site or nearby borrow soil with minimal processing) is usually the least expensive option in the Dublin area. Select or engineered fill that is tested, free of debris, and meets compaction specs costs more, but may be required for structural or permit-driven jobs.

Ordering bulk delivery through a marketplace like Hello Gravel is often the cheapest route because you avoid multiple small-haul fees and we match you with local suppliers to minimize transport distance. Also check for local construction sites offering clean fill or request a nearby supplier to reduce per-ton hauling costs; always verify material suitability and local regulations.

A 10-yard load in Dublin will generally run about $120 to $300 for material plus delivery, depending on whether the soil is native, screened, or select fill. Your final Hello Gravel quote will include the specific delivery fee and any minimum-order considerations.

No. Fill dirt is intended for grading, structural fill, and creating subgrades—not as a finished surface or planting medium. For lawns, gardens, and finished surfaces in Dublin, place an appropriate depth of topsoil over the compacted fill dirt or use a decorative material for final cover.

Calculate the volume by multiplying the area (in square feet) by the desired depth (in feet) and dividing by 27 to get cubic yards, then add 10-20% for settlement and compaction. Use Hello Gravel's material calculator or contact our team with your project dimensions and we will help convert to tons and provide a delivery quote for Dublin.