Fill-dirt in Columbus, OH

Fill dirt is generally cheaper per cubic yard than gravel in Columbus because it is less processed and often available from local excavation projects. Gravel costs more because it is crushed, screened, and often washed; pricing also depends on local supply and hauling distance.

Prices vary by supplier and site access, but expect roughly $150 to $450 for a typical tri-axle dump truck load (about 10 to 12 cubic yards) delivered in Columbus. Exact pricing depends on quantity, delivery distance, and whether you need spreading or permits.

In Columbus, homeowners commonly see fill-dirt pricing around $12 to $35 per cubic yard delivered, depending on material quality and delivery logistics. Costs can be lower for larger orders or short hauls and higher for tight access or same-day requests.

Fill dirt is mostly subsoil—clay, silt, and sand—used to raise or level ground and is not intended for drainage. Gravel is crushed rock or rounded stone used for drainage, driveways, and structural base layers; gravel provides stability and water flow while fill dirt compacts to support grade.

A typical tri-axle dump truck used in Columbus carries about 10 to 12 cubic yards of loose fill-dirt. Carry weight will vary by moisture content; drivers and suppliers will confirm exact capacity when scheduling delivery.

A full-size pickup bed usually holds about 1/2 to 3/4 cubic yard of loose fill-dirt safely without overloading. One cubic yard will likely be too much for a standard pickup and could exceed axle or payload limits.

One cubic yard covers about 81 square feet at 1 inch deep (27 square feet at 3 inches deep). For quick visual, one cubic yard is roughly a 3-foot by 3-foot by 3-foot cube.

Coverage per ton depends on material density, but a good rule of thumb for loose fill-dirt in Columbus is roughly 0.6 to 0.9 cubic yards per ton. To estimate area, convert the cubic yards needed for your target depth and multiply by that range to get tons; your supplier can give a precise weight-based conversion.

Hello Gravel's platform has a minimum order equivalent to about 3 tons. Exact minimums can vary by supplier and delivery location, so check availability for your Columbus zip code during checkout.

Yes, you can place gravel over compacted fill dirt, but the fill should be properly graded and compacted first to prevent settling. For driveways or heavy-traffic areas, installers often add a compacted base layer and geotextile before placing gravel to improve stability and drainage.

Late spring through early fall is usually best in Columbus because the ground is less frozen and it's easier to compact and grade. Avoid heavy freeze-thaw periods and very wet conditions, which make compaction difficult and increase the risk of settling.

Yes, fill dirt is typically less expensive than topsoil because fill dirt is subsoil without organic matter and does not support planting. If you need a surface suitable for lawns or planting, budget extra for topsoil or a blend rather than plain fill dirt.

To cover 1,000 sq ft at 2 inches depth you need about 6.17 cubic yards; at 6 inches depth you need about 18.5 cubic yards. Use our material calculator or tell suppliers your area and desired depth for an exact quantity and weight estimate.

Provide your delivery address, desired delivery date, access notes (driveway width, overhead wires, gate), target depth or project dimensions, and any preference for material appearance. Also mention if you want the driver to attempt tailgate spreading, understanding this is at the driver's discretion.