Gravel in Akron, OH

Cost depends on truck size, the type of gravel, and local supplier rates. A typical tri-axle truck in Akron carries roughly 10-15 cubic yards (about 12-18 tons) and one load can cost anywhere from about $300 to $1,200 total depending on material type and delivery fees. Hello Gravel requires a 3-ton minimum and will provide an exact quote for your zip code and delivery details. Get a custom quote to see the precise cost for your project.

One ton of typical gravel will cover roughly 100 to 120 square feet at a 2-inch depth. At 3 inches it covers about 65 to 80 square feet, and at 4 inches about 50 to 60 square feet. Coverage varies with stone size and compaction, so order about 10% extra to allow for settling and grading.

Price per ton varies by type and local supply; in Ohio you’ll commonly see bulk gravel in the range of about $20 to $60 per ton. Finer decorative gravels and specialty stone sit at the higher end while recycled crushed concrete and crusher-run are cheaper. For an accurate local price, request a Hello Gravel quote for your Akron zip code.

Buying bulk delivered by the ton is usually the cheapest option compared with bagged gravel from retail stores. Choosing recycled crushed concrete or crusher-run, and ordering larger quantities to reduce per-ton delivery cost, also lowers expenses. Compare Hello Gravel quotes from local suppliers to find the most cost-effective option near Akron.

No, 2 inches is generally not sufficient for a driveway in Akron. Because of freeze-thaw cycles and local clay soils, aim for 4 to 6 inches of compacted gravel for a residential driveway, and build a proper base if the ground is soft. Two inches may be acceptable only as a thin top dressing over an already solid base or for a walking path.

Cost depends on driveway width and depth, but as an example a 20 ft by 10 ft driveway (200 sq ft) at a 4-inch depth needs roughly 3.5 to 4 tons of gravel. At typical Akron bulk prices that could run roughly $150 to $400 for material, plus delivery and spreading if requested. Hello Gravel’s checkout will calculate exact tonnage and give a firm price for your address.

Coverage depends on truck volume and depth: a 10-yard load covers about 1,620 sq ft at 2 inches, and a 10-yard load covers roughly 810 sq ft at 4 inches. Tri-axle loads commonly range from about 10 to 15 cubic yards, so coverage at 4 inches would be roughly 800 to 1,200 sq ft. Exact coverage varies with stone size, compaction, and truck load size.

Gravel surfaces can last many years with regular maintenance: expect to add fresh gravel or regrade every 1 to 3 years for high-traffic areas and more substantial resurfacing every 7 to 15 years. Lifespan depends on use, drainage, winter freeze-thaw cycles common in Akron, and whether a solid base was installed. Proper grading and occasional top-ups greatly extend service life.

Tonnage depends on width and desired depth. For a 40 ft long by 12 ft wide driveway at a 4-inch depth you will need about 8 tons of gravel, while a 40 ft by 10 ft driveway at 4 inches needs about 6.5 to 7 tons. Add about 10% extra for compaction and grading, and use Hello Gravel’s calculator for a precise material amount for your lot.

Recycled crushed concrete, crusher-run (also called crush-and-run), and locally sourced bank-run materials are usually the least expensive options. Prices depend on local supply and demand around Akron, so availability can make one option cheaper than another. If cost is the priority, ask Hello Gravel for recycled or crusher-run options when getting quotes.

Using a common per-ton range of about $20 to $60, 20 tons would typically cost between $400 and $1,200 for material alone, with delivery fees added depending on distance and truck type. Specialty or decorative gravels cost more, while recycled materials sit at the low end of the range. Request a Hello Gravel quote to see the exact delivered price for 20 tons to your Akron address.

Clear the drop area and a safe truck access path, remove vehicles, and mark preferred drop locations with stakes or spray paint so drivers know where to unload. Note overhead wires, narrow streets, or HOA and city rules in Akron that could affect where a truck can offload, and let us know at checkout if you need tailgate spreading. For winter deliveries, be aware frozen or muddy ground may change unloading options and timing.

A common recommendation is a compactable base of crusher-run (mixed sizes) topped with 3/4-inch crushed stone for the finish layer. Crusher-run locks together for stability and good drainage while 3/4-inch stone provides a durable, drivable surface. Local Akron soils and freeze-thaw cycles make a well-compacted base and proper drainage especially important.

A 10-yard load typically weighs about 12 to 14 tons depending on stone density and will cover about 1,620 sq ft at a 2-inch depth or about 810 sq ft at a 4-inch depth. Cost depends on the material type but expect a broad range roughly from $300 to $900 delivered in the Akron area. Contact Hello Gravel for an exact price and to confirm the truck size and drop options for your address.