Gravel in Grand Forks AFB, ND

Pea gravel delivered to Grand Forks AFB typically ranges by supplier and season. Expect roughly $30 to $60 per ton or about $40 to $70 per cubic yard delivered for residential quantities; a tri-axle truckload (10-12 cu yd) would therefore often cost about $400 to $840. Prices vary with supplier, delivery distance, and whether you need small-quantity service, so get a local quote for an exact price.

In the Fargo/Grand Forks region, Class 5 (road base) is usually less expensive than decorative gravels. Typical pricing is about $12 to $28 per ton, which converts to roughly $17 to $39 per cubic yard depending on compaction and moisture. Local sourcing and seasonal demand can push prices to either end of the range, so request a delivered quote for your exact location.

Deliveries to Grand Forks AFB are possible but require extra coordination because of base access rules and security checks. You should expect additional lead time for scheduling, possible base entry paperwork or escorts, and occasional access fees; contact our team early so we can coordinate with the supplier and the base. Standard Hello Gravel lead time is 2+ business days for off-base delivery, and next-day options may be available for orders placed before noon CST.

A common tri-axle dump truck in this region typically carries about 10 to 12 cubic yards. A 1,000 sq ft area at 4 inches deep requires about 12.35 cubic yards (1,000 x 4/12 / 27 = 12.35 cu yd), so you will usually need one full tri-axle plus a small extra — in practice plan on two truckloads to allow for compaction and coverage. For weight planning, a good rule of thumb is about 1 cubic yard ≈ 1.4 tons, and Hello Gravel minimum order is 3 tons.

Yes, Class 5 is commonly used as a stable base in freeze-thaw climates like Grand Forks when installed correctly. Install a 4 to 8 inch compacted base (thicker for driveways with heavier vehicles), spread material in 2 to 3 inch lifts and compact each lift with a plate compactor or roller, and ensure positive drainage away from paved areas. Top the compacted base with a wearing course (3/4u0022 crushed stone or pea gravel) if desired to improve surface durability.

Local Class 5 mixes are usually a graded blend from about 3/4 inch down to fines (stone dust) so the mix locks together for compaction. That range makes Class 5 ideal for grading and creating a firm, compacted base. For a finished surface, 3/4u0022 crushed stone or 3/8u0022 screenings give a firm driving surface, while pea gravel is used for decorative or walking areas but does not compact as well as crushed stone.

Many local suppliers prefer truckload deliveries, and Hello Gravel's minimum order is 3 tons, but smaller deliveries are sometimes available for an extra fee or via bagged products. If you need less than a truckload, expect a higher per-ton price and possible minimum delivery charges; consider pickup, buying bags from a landscape yard, or requesting a small delivery quote at checkout.

Yes, some suppliers and local contractors in the Fargo/Grand Forks area offer grading, installation, and compaction services in addition to material delivery. Installation costs vary with scope, access, and surface prep but commonly range from modest per-square-foot rates to several dollars per square foot for full grading, base prep, and compaction; ask for itemized local quotes. Hello Gravel can connect you with local providers to get estimates for labor plus material.

Yes. Winter weather, heavy snow, and spring thaw (mud season and road weight restrictions) can slow deliveries, raise fuel or ice-winter service fees, and in spring may trigger axle weight limits that limit truck size. Supply can also tighten after big construction seasons or severe weather, so plan ahead and schedule deliveries early in spring and fall to avoid delays or premium charges. We recommend checking availability and booking delivery dates in advance.

Yes, many local suppliers and haulers support commercial accounts and recurring delivery contracts for ongoing projects. Hello Gravel can help obtain quotes, arrange standing orders, and coordinate delivery schedules; contracts typically include minimum volumes, lead times, and negotiated pricing based on frequency and quantity. Contact our sales team with project details to get a customized commercial quote.