Gravel in South Weldon, NC

A full tri-axle dump truck in the South Weldon area typically carries about 10 to 12 tons of gravel. Delivered price for a full truckload usually runs between $300 and $900 depending on gravel type, local material costs, and any delivery fees; smaller loads are priced per ton and may cost more per ton. Hello Gravel has a 3-ton minimum order and can give an exact delivered price after checking zip code and material selection.

Cost depends on depth: at 2u0022 you need about 8.6 tons, at 3u0022 about 13 tons. Using a local material price range of $25 to $45 per ton plus typical delivery, expect roughly $250 to $800 total for materials and delivery; exact price depends on gravel type, delivery distance, and available truck sizes.

Total cost varies with driveway width, site prep, and desired depth; a common range for installed gravel is $3 to $8 per square foot. For a 20 ft long by 10 ft wide driveway (200 sq ft) you can expect roughly $600 to $1,600 for materials, grading, compaction, and labor, while larger widths or extensive site prep will increase costs. Contact Hello Gravel for local supplier and installer referrals for an accurate, site-specific quote.

Two inches is generally insufficient for a driveway because it won’t provide a durable wearing surface and will compact poorly over time. We recommend 3 to 4 inches for resurfacing over a solid base and 4 to 6 inches for new driveways with proper base preparation; using only 2u0022 lowers your material cost proportionally, but it often increases maintenance and replacement costs down the road. Expect material costs to increase roughly 50% when going from 2u0022 to 3u0022 depth and proportionally more for deeper sections.

If you need large amounts, a full truckload is usually the best value because the delivered price per ton is lower. For small residential jobs, buying by the ton is easiest and matches Hello Gravel’s 3-ton minimum; contractors may prefer ordering by cubic yard for planning. Always compare per-ton and per-cubic-yard pricing and ask about delivery fees—Hello Gravel can run the numbers for your zip code and project size.

A 20x20 area is 400 sq ft. At 3u0022 depth you need about 5.2 tons of gravel; material costs for that amount typically run $130 to $235 plus delivery. Adding grading, compaction, and labor can bring the total to approximately $530 to $1,600 depending on site conditions and whether any base or drainage work is required.

Use this quick method: cubic yards = (area in sq ft * depth in inches) / 324. For 1,000 sq ft: 2u0022 = ~6.17 cu yd (~8.6 tons); 3u0022 = ~9.26 cu yd (~13.0 tons); 4u0022 = ~12.35 cu yd (~17.3 tons). For 20x20 (400 sq ft): 2u0022 = ~2.47 cu yd (~3.45 tons); 3u0022 = ~3.7 cu yd (~5.2 tons); 4u0022 = ~4.94 cu yd (~6.9 tons), using a conversion of about 1.4 tons per cubic yard for typical gravel.

Hello Gravel’s minimum order is 3 tons. Standard delivery lead time is 2+ business days, and next-day delivery is often available for orders placed before noon CST for an extra fee. Delivery fees vary by supplier and distance; many areas have free delivery while others add a small fee—your final price will appear at checkout after entering your zip code and material choice.

Some local suppliers and contractor partners do offer full-service installation including site prep, old material removal, grading, and compaction, but availability varies by supplier. Package prices depend heavily on scope; simple resurfacing might run a few hundred dollars while full installs with excavation and base work can cost $1,000 to $5,000 or more. Ask Hello Gravel to connect you with local providers and get on-site estimates for an accurate package price.

Yes—Hello Gravel can help get you a quote, but accurate pricing requires information about driveway size, existing material, access for trucks, and whether you'll keep or dispose of old material. Typical resurfacing quotes will itemize material cost, hauling/disposal of old material, and labor for grading and compaction; provide photos and dimensions or request an on-site estimate to get the most accurate price.