Fill Dirt in South View, NC

Fill-dirt is general subsoil (usually free of large organic material) used to raise grade, fill low spots, or build embankments. In the South View area it is commonly clayey or sandy depending on local borrow pits, and it is meant for structural fill—not as a final surface. Use it to build up elevation before installing gravel, pavement, or landscaping, and always compact it in layers.

Delivered prices vary with distance and supplier, but in the North Carolina region fill-dirt commonly runs about $12 to $22 per cubic yard delivered. Costs can be higher for short-notice, long hauls, or if screening and large-rock removal are required; check your zip code on Hello Gravel for an exact quote.

Most tri-axle dump trucks carry about 10 to 12 cubic yards per load, and delivered load prices for fill-dirt in the region commonly range from roughly $150 to $500 per truck. Final cost depends on distance from the supplier, local tipping rules, and any requested spreading or offloading services.

Use this quick formula: cubic yards = (length ft * width ft * depth in) / 324. For example, a 20 ft by 10 ft area (200 sq ft) needs about 1.23 yd3 at 2", 2.47 yd3 at 4", and 3.70 yd3 at 6"; always order 5–10% extra for settlement and compaction.

A 50 lb bag of loose fill-dirt is about 0.5 cubic feet, so at 1" depth it covers roughly 6 sq ft and at 2" about 3 sq ft. Bagged fill is convenient for tiny touch-ups, but for anything larger than a few square feet bulk delivery is far more cost-effective in the South View area.

Fill-dirt itself is not designed to harden like concrete, but soil stabilizers (lime, cement, or polymer binders) can be used to stabilize soils and create a firmer base. These products and contractors who apply them are available in the North Carolina region, but they require design consideration and compaction testing — contact local suppliers or Hello Gravel for referrals and ask a geotech if the application is load-bearing.

Many local suppliers and drivers will offer limited tailgate spreading at their discretion; it's a request you can add at checkout but not guaranteed. Commercial pricing often charges a flat per-load fee for basic spreading (commonly $50–$150 per load) or an hourly rate for detailed labor; confirm availability and fees when you order.

For driveways in the South View area, crushed stone or crusher-run makes a much better wearing surface because it drains and compacts well; plain fill-dirt (especially clayey fill common locally) tends to hold water, rut, and settle. A common approach is to use fill-dirt only where you need to raise grade, then install a compacted stone base and a stone or asphalt surface on top.

Low-cost options include bulk fill-dirt to raise grade, recycled crushed concrete or reclaimed base, and crusher-run as a finished base. Rough delivered price ranges in the North Carolina region are: fill-dirt $12–$22/yd3, reclaimed base $15–$35/yd3, and crusher-run $25–$45/yd3; a small 200 sq ft area at 4" depth (about 2.5 yd3) would therefore cost a few dozen to a few hundred dollars for material depending on the option and local haul.