Gravel in North Hills, NC

Prices vary by type and supplier, but expect roughly $20 to $50 per ton (about $25 to $70 per cubic yard) for common gravels near North Hills. Delivery fees often range from free to $0-$150 depending on distance, access, and order size; Hello Gravel requires a 3-ton minimum. For an exact price, enter your zip code on Hello Gravel or contact our team for a local quote.

Hello Gravel works with local quarries and haulers that serve North Hills and Wake County; specific suppliers vary by zip code. Typical minimum orders are 3 tons, and many local suppliers offer free delivery for larger loads while smaller orders or tight access can incur extra fees. Check availability in checkout or call Hello Gravel to see which local partners and fees apply to your address.

For North Hills' clay-prone soils and seasonal freeze/thaw, crushed stone (3/4u0022 or #57) and crusher-run perform well because they compact and shed water. Pea gravel and decomposed granite are attractive for low-traffic patios and paths but can shift on clay without a proper compacted base. Wherever drainage is a concern, include a compacted subbase and consider geotextile fabric to stabilize the gravel.

Use cubic yards = (area in sq ft * depth in inches) / 324, then convert to tons by multiplying cubic yards by about 1.4 (density varies by type). For example, a 20'x20' driveway (400 sq ft) at 4u0022 depth needs ~4.9 cubic yards or roughly 7 tons. Hello Gravel's material calculator also estimates quantities when you enter dimensions and desired depth.

Examples at 4u0022 compacted depth: a 2-car driveway (20'x20') needs about 7 tons, a larger 2-car driveway (24'x24') about 10 tons, and a 3-car driveway (30'x40') about 21 tons. A 12'x12' patio at 2u0022 depth needs roughly 1.3 tons, while a 3'x50' path at 2u0022 depth is about 1.3 tons as well. Adjust depth and compaction for local soil conditions and traffic.

Material-only prices typically range from $20 to $50 per ton, depending on gravel type. Installed costs vary with site prep, grading, edging, and drainage but commonly run $2 to $6 per sq ft for basic gravel driveways; complex jobs with heavy grading or drainage can be $6 to $10+ per sq ft. Ask Hello Gravel for material pricing and get contractor estimates for installation to budget accurately.

With normal use in the Raleigh area, expect to add a thin top-up (1u0022 to 2u0022) every 1 to 3 years and a more substantial refresh or regrading every 3 to 7 years. High-traffic areas or sections on clay and poor drainage will need more frequent maintenance, including re-compaction and regrading after heavy rains. Regular maintenance like raking, filling potholes, and keeping grades for drainage will extend time between major repairs.

Permit needs vary by municipality; in Raleigh and Wake County a driveway permit may be required for curb cuts or major changes, but small residential resurfacing often does not. Many HOAs in North Hills restrict or prohibit gravel driveways, so check your HOA rules and talk to the city or county planning office before ordering. When in doubt, contact Hello Gravel or your local building department for guidance.

For high-traffic driveways on clay, use a geotextile fabric, a 4u0022 to 8u0022 compacted subbase of crusher-run or crushed stone, and a 2u0022 to 3u0022 top layer of 3/4u0022 crushed stone or #57 for traction. Increase subbase depth to 6u0022 to 8u0022 where drainage is poor or traffic is heavy, and add a slight crown to promote runoff. Proper compaction and edge restraints help prevent spreading and rutting on clay subgrades common around North Hills.

Gravel has the lowest upfront cost and good permeability, making it attractive for many North Hills homeowners, but it requires more regular maintenance and top-ups. Asphalt and concrete cost more up front, last longer with less frequent maintenance, and perform better on clay soils if properly installed with base and drainage. Pavers offer durable, attractive surfaces but are usually the most expensive; choose based on budget, maintenance tolerance, and local drainage conditions.

Common add-ons include edge restraints (timber, metal, or stone), drainage solutions (French drains, catch basins), grading and regrading, and extra hauling charges for tight access or long carry distances. Edge restraints typically add a few dollars per linear foot installed, drainage solutions can range from a few hundred to several thousand dollars, and special access or small load fees depend on supplier logistics. Ask Hello Gravel about site-specific charges during checkout so your quote includes likely add-ons.