Fill Dirt in Commonwealth, NC

In Commonwealth, NC, delivered fill-dirt commonly ranges from about $20 to $40 per cubic yard, depending on supplier, haul distance, and quantity. Prices can be higher for small orders, long drives, or sites with restricted access, so check your quote for exact delivered pricing.

A 10-yard load of fill-dirt in the NC region typically costs roughly $200 to $400 for the material, with total delivered price often in the $250 to $600 range once delivery or fuel surcharges are included. Final cost depends on your exact Commonwealth location, truck access, and whether you need spreading or short-haul fees.

For 1,000 sq ft: 1 inch depth = 3.09 cubic yards, 2 inches = 6.17 cu yd, 3 inches = 9.26 cu yd, and 4 inches = 12.35 cu yd. Convert to tons using a local fill-dirt density range (about 1.2 to 1.6 tons per cubic yard in NC), so expect roughly 3.7-5.0 tons per inch, and about 14.8-20.0 tons at 4 inches.

Tri-axle dump trucks commonly carry about 10 to 15 cubic yards; a single 10-yard truckload of fill-dirt delivered to Commonwealth usually falls in the $250 to $600 range, while a 15-yard load will be proportionally higher. Distance, access, and whether the truck must make multiple drops or use smaller trucks for tight sites will change the price.

Yes, plain fill-dirt is generally cheaper per cubic yard than crushed gravel or structural stone for basic leveling and raising grade. However, fill-dirt does not provide the same drainage or load-bearing characteristics as gravel, so for driveways or areas that need compaction and stability you may ultimately need a more expensive aggregate base.

Fill-dirt alone is not recommended as a lasting driveway surface because it can rut, hold water, and shrink or settle over time; a proper driveway usually needs a compacted aggregate base (stone) topped with gravel or paving. Installation costs vary: adding a compacted base of aggregate can add $8 to $25 per square yard (material and placement), whereas top dressing and paving will add more—get an on-site assessment for accurate local estimates.

Yes, red clay common in NC can influence both the amount of fill you need and the type of material recommended; clay can shrink or swell seasonally and may require extra fill to allow for compaction and settling. In many Commonwealth projects contractors recommend mixing or capping clay with cleaner structural fill or stone and performing compaction testing for long-term stability.

Hello Gravel offers standard delivery in many areas with lead times of 2+ business days and next-day delivery for orders placed before noon CST for an extra fee; some Commonwealth deliveries are free while remote or tight-access sites may incur surcharges. Tailgate spreading is available at the driver’s discretion and, when offered, can carry additional fees typically ranging from about $50 to $200 depending on quantity and site conditions; always request spreading at checkout and confirm the driver can safely perform it.

Suppliers in North Carolina may quote fill-dirt either per cubic yard or per ton, but per-cubic-yard pricing is common for loose fill-dirt because buyers think in volume for grading and landscaping. If you receive a per-ton price, ask the supplier what density they assume (typical loose fill-dirt density in NC is about 1.2 to 1.6 tons per cubic yard) so you can compare quotes accurately.

Using a typical NC density of about 1.3 tons per cubic yard, one ton is roughly 0.77 cubic yards. That will cover about 62 sq ft at 4 inches deep, about 125 sq ft at 2 inches deep, and about 250 sq ft at 1 inch deep; actual coverage will vary with material density and how much compaction you need.

Hello Gravel has a minimum order of 3 tons and standard delivery lead time of 2+ business days, with next-day delivery available for orders placed before noon CST for an added fee. Provide clear delivery instructions and site access details at checkout to avoid delays, and contact our team if you need to change an order before it is dispatched.