Fill Dirt in Clemmons, NC

Local fill dirt prices vary by supplier, delivery distance, and seasonal demand. In the Southeast, loose fill dirt commonly falls in a broad ballpark of about $10 to $30 per cubic yard, but exact rates change frequently—use Hello Gravel’s online checkout for a live price for your Clemmons zip code or contact our team for a quote.

Hello Gravel works with local suppliers and haulers that serve the West North Carolina area and will show available vendors for Clemmons when you enter your zip code. Minimum order sizes depend on each supplier, but our platform minimum is 3 tons and common dump-truck deliveries are in the 10 to 14 ton range for a tri-axle load.

Clemmons sits in a region with clay-rich Piedmont soils and a humid climate, so pure fill dirt can hold moisture and settle more than sandy material. For driveways and raised yards you should expect slower drainage and greater settlement risk unless you add drainage layers or compact in lifts; contractors often use a crushed stone base under driveways and place topsoil only where you intend to grow plants.

Permit requirements depend on the scope of the work and whether stormwater, erosion control, or road access are affected; small residential deliveries usually do not need permits, but larger grading or drainage changes often do. Check with the Town of Clemmons Planning and Inspections or Forsyth County zoning before starting large fills to confirm local thresholds and any erosion-control requirements.

Deliveries are typically made by tri-axle dump truck; you should confirm overhead clearance, driveway width, and any tight turns before scheduling. Fees may apply for next-day delivery, long offload distances, restricted access, or if the driver cannot safely tailgate spread—provide site photos at checkout to help determine potential extra charges.

Use the formula: volume (yd3) = area (ft2) x depth (ft) / 27. For example, a 10 x 20 ft area raised 6 inches (0.5 ft) needs about 3.7 yd3, which is roughly 4.8 tons assuming 1.3 tons per yd3; contractors commonly add 10 to 30 percent extra (20% is a typical rule of thumb) to allow for compaction and minor waste.

For structural work such as foundation backfill or driveway bases, contractors commonly compact fill in 6 to 8 inch lifts and aim for high densities (often measured against a Standard Proctor test). If your project is structural, get an engineer’s recommendation or check with local building officials, since the Town of Clemmons or a project permit may require specific compaction testing or engineered fill specifications.

Fill dirt is primarily subsoil with low organic content, so it is good for raising grades but tends to compact and drain poorly. Crushed stone provides stability and drainage under driveways, while topsoil is needed on the surface for plant growth; a layered approach (stone base, compacted fill, topsoil cap) often gives the best performance in the Clemmons climate.

Yes. Clemmons sees humid conditions and heavy rain events that can delay delivery, make sites muddy, and slow compaction work; freeze-thaw is less severe than in northern climates but can still affect surface stability in winter months. Schedule deliveries during drier windows when possible and use erosion-control measures if working in rainy seasons.

Common add-ons include fees for screening or special soil specs, extra hauling for tight access, tailgate spreading or labor, compaction equipment rental or contractor fees, and any required erosion-control measures or permits. Ask suppliers for itemized quotes and provide site photos so Hello Gravel can identify potential extra costs up front.