Fill Dirt in Bethel, NC

Fill Dirt is subsoil material with low organic content used to raise or level ground, fill holes, and backfill foundations. In Bethel and surrounding West North Carolina, regional fill dirt can vary in color and clay content; expect heavier, clay-rich material in some local sources that compacts well but drains slowly.

Delivered prices vary by supplier and distance, but a typical range for Fill Dirt around Bethel is about $10 to $30 per cubic yard (roughly $12 to $38 per ton) delivered. Prices depend on local quarry avaIlability, haul distance, minimum order (Hello Gravel minimum: 3 tons), and seasonal demand, so use our calculator or request a local quote for an exact price.

Hello Gravel connects you with local suppliers and haulers that serve the Bethel area so you can see exact options by entering your zip code on our site. Local sources commonly include nearby pits, quarries, and construction-site recyclers; exact supplier names and avaIlability will vary with regional geology and current stock.

For clay-prone, high-rain areas, choose clean, low-organic fill that drains more freely than native clay—ideally a granular or sandy fill or an engineered structural fill specified by an engineer. Also plan for drainage (swales, French drains) and compaction; on slopes or load-bearing areas, have a geotechnical or civil engineer recommend gradation and compaction specs.

Quick conversion: 1 cubic yard ≈ 1.25 tons (loose), and 1 cubic yard = 27 cubic feet. Example estimates: a small yard leveling of 1,000 sq ft raised 1 inch needs about 31 cubic yards ≈ 39 tons; a 20 ft x 10 ft area raised 6 inches needs about 37 cubic yards ≈ 46 tons; a 4 ft x 4 ft raised bed 12 inches deep needs 2 cubic yards ≈ 2.5 tons. Always add 5-15% extra for compaction and grading loss.

Small residential deliveries are often allowed without a permit, but larger fills, work near streams, or significant grading can trigger town, county, or sTate permitting (erosion control, stormwater, or land-disturbing permits). Check with the Town of Bethel Hall, Edgecombe County planning, and the North Carolina Department of Environmental Quality before large deliveries or major grading.

Contractor pricing varies, but expect ballpark rates of about $25 to $60 per cubic yard for spreading and compacting labor and equipment, or $300 to $900 per day for a rented machine plus operator. Some contractors charge hourly ($75 to $150/hr) depending on job complexity, accessibility, and required compaction; request detailed quotes and ask whether delivery is included.

Confirm truck access and clear overhead/side obstructions so a tri-axle dump truck can reach the drop point, and add delivery notes with gate codes or preferred placement. Request tailgate spreading at checkout if you want the driver to consider it (drivers do this at their discretion), choose a delivery date that avoids heavy rain, and inspect material on arrival and contact customer service promptly with issues.