Fill Dirt in Bertie County, NC

Delivered fill-dirt prices in Bertie County vary with distance, quantity, and supplier but commonly fall in the range of about $10 to $30 per ton delivered to rural sites. Minimum orders and truck access can affect price, so use Hello Gravel to get a location-specific quote and check if free delivery applies in your area.

Hello Gravel partners with local suppliers and contractors that serve Bertie County, and many suppliers offer contractor-grade fill-dirt; availability varies by zip code. Some drivers may provide tailgate spreading at their discretion—request it at checkout and confirm with our team because spreading is not guaranteed and depends on site conditions and truck access.

Bertie County sits in the coastal plain where clay-rich and organic soils can hold water and compress more than sandy soils, so you should expect more settlement over time. Contractors typically use controlled lifts and compaction to reduce future settling, and may also import granular material for load-bearing areas to improve drainage and stability.

To estimate: 1,000 sq ft at 6 inches equals about 500 cubic feet, or roughly 18.5 cubic yards. Using a typical compacted fill-dirt weight of about 1.2 to 1.3 tons per cubic yard, expect approximately 22 to 25 tons for 1,000 sq ft at 6 inches; order extra for settlement and grading loss.

Yes. Bertie County is low-lying and prone to heavy rains and seasonal flooding (especially during hurricane season), so schedule major fill work in dry periods—late spring through early fall is usually best. Avoid delivery on saturated ground, use erosion controls, and check weather forecasts and local floodplain maps before scheduling.

Use fill-dirt when you need to raise grades or infill low areas because it is cost-effective and compacts well, but it is not ideal as a finished surface or planting medium. For driveways and load-bearing surfaces, crushed stone or compacted gravel is more durable and drains better; topsoil should be used only as a planting layer on top of properly graded and compacted fill.

Bertie County may require permits for substantial grading, work in mapped floodplains, or activities that affect drainage and wetlands, so check with Bertie County Planning and Inspections before starting large fills. For projects near streams or wetlands, also consult state agencies (N.C. Division of Water Resources) to ensure compliance with local and state regulations.

Contractors in the coastal plain usually compact fill-dirt in lifts of 6 to 8 inches loose, using vibratory plate compactors for small areas and sheepsfoot or vibratory drum rollers for larger or clayey fills. Typical targets are roughly 90% to 95% of Standard Proctor density (as specified by project or local code), with moisture conditioned near optimum before compaction to achieve required density.