Fill Dirt in Yonkers, NY

Typical delivered prices for fill-dirt in the Yonkers area commonly fall in the range of about $12 to $30 per cubic yard, which is roughly $9 to $23 per ton (1 cu yd is about 1.3 tons). Price depends on material quality, distance from supplier, access to your site, and total volume ordered. Check your zip code on Hello Gravel for exact pricing and available suppliers.

Fill-dirt is usually not a good final surface for driveways in Yonkers because it contains fines that hold water and can heave or rut during freeze-thaw cycles. It can be used as backfill or to build up grades, but for a driveway base choose well-graded, angular base materials (like crusher-run) and a proper wearing surface on top. Make sure the base is compacted and drains well to reduce frost-related movement.

One cubic yard of fill-dirt is roughly 1.3 tons. Example estimates: patching a 10'x20' area at 6u0022 deep needs about 4 cubic yards (about 5.2 tons); raising a small front yard 3u0022 over 50'x50' needs roughly 23 cubic yards (about 30 tons). Use Hello Gravel's material calculator or contact our team with project dimensions for a precise estimate.

Hello Gravel's minimum order is 3 tons, and standard delivery times are 2+ business days. Next-day delivery is available for orders placed before noon CST for an additional fee, though local supplier minimums and scheduling may vary. Always check availability and choose your preferred delivery date at checkout.

Permit needs vary depending on changes to grade, proximity to wetlands or floodplains, stormwater impacts, and the city code. Larger deliveries or projects that alter drainage often require a permit or site plan approval from the City of Yonkers Building Department or Department of Public Works. We recommend contacting Yonkers permitting offices before ordering large volumes to confirm local rules.

Fill-dirt is primarily used for raising grade or backfilling and contains more fines, so it does not compact into a strong, drained base. Crusher-run and recycled concrete are crushed, angular materials that interlock and shed water, making them much better choices for driveway bases in Yonkers. Use fill-dirt behind foundations or to level areas, and use crusher-run/recycled concrete for structural base layers and surfaces.

Place fill-dirt in 4 to 6 inch lifts and compact each lift with a plate compactor or roller to reduce future settling. Maintain near-optimal moisture — too wet or too dry makes compaction ineffective — and slope the area to shed water away from structures. Avoid using fill-dirt as the finished surface; topcoat with suitable base rock if the area will see traffic.

Expect the most settlement and need for touch-ups during the first year after placement, especially after spring thaw and heavy rains. If fill-dirt is used as a base and properly compacted, maintenance is minimal once a proper wearing surface is installed; if left as a surface it may need regrading or additional material annually. Regularly check low spots and areas that pond, and add material and re-compact as needed.

Fill-dirt is typically a mixture with fines and is not classified by angular versus rounded characteristics; however, angular crushed stone or aggregate is better for drainage and load-bearing. If your project needs structural support or drainage (driveway bases, road approaches), choose angular crushed materials rather than relying on standard fill-dirt. Use fill-dirt for non-structural leveling and backfill where drainage is not critical.

For small yard patches and simple grading, a confident DIYer can save money renting equipment and handling compaction, but you should factor in truck access, spreading equipment, and compaction tools. For large-volume fills, driveway bases, or projects near structures where compaction and grading matter, hiring a contractor reduces risk and typically delivers better long-term results. Hello Gravel can deliver the material to your site; discuss spreading and job complexity with our team so you can decide whether to DIY or hire a pro.