Fill Dirt in Ridgewood, NY

Expect a broad local range rather than a single price: delivered fill-dirt in the Ridgewood/West New York area commonly runs roughly $20 to $50 per ton (about $15 to $37 per cubic yard, using ~1.35 tons/yd3). Final price depends on source, screening, truck access, and disposal/permits, so check your zip code on Hello Gravel or request a quote for an exact delivered price.

Hello Gravel connects you with trusted local suppliers and contracted dump truck haulers that serve Ridgewood and the surrounding metro area. Availability of screened fill-dirt varies by neighborhood and supplier; enter your zip code on our site or contact our sales team to see current suppliers and delivery windows.

For residential work expect to compact fill-dirt in lifts to about 90% to 95% of Standard Proctor density; compacted bulk density typically falls in the 1.2 to 1.45 tons per cubic yard range depending on moisture and soil type. Achieve this by placing material in 4 to 6 inch lifts and using a plate compactor or roller for each lift.

Small deliveries for typical yard grading usually do not trigger major permits, but substantial grade changes, large volumes, or work in NYC jurisdiction often require permits or notifications to the local building department and stormwater control authorities. If the site is in New York City (Ridgewood is partly within NYC), check with NYC Department of Buildings and the Department of Environmental Protection, and consider soil testing if the fill comes from outside the region.

Seasonal freeze–thaw can cause fill-dirt with lots of fines to heave and settle, worsening unevenness and drainage issues over time. To reduce problems in Ridgewood's climate, compact properly, improve surface drainage, and use a coarse stone layer beneath pavements so water moves away from the fill and freezes less within the subgrade.

For lawn grading, place and compact 4 to 6 inches of fill-dirt in lifts; for patios, prepare a 6 to 8 inch compacted subgrade and then add a stone base as directed by paved-surface specs. For residential driveways, use 6 to 12 inches of compacted fill-dirt only as subgrade, plus a 4 to 8 inch compacted crushed-stone base on top; always compact in 4 to 6 inch lifts with proper equipment to limit settling.

Fill-dirt is an economical option for raising grade and filling low spots but contains fines and holds water, so it is not ideal as the structural base under pavements. Crusher run is a blended, compactable base that works well under driveways, while clean stone provides excellent drainage but costs more. Topsoil is for planting and should not be used under driveways or as a structural fill.

A driveway with only fill-dirt under the pavement will likely show settling and deformation within months to a few years unless the subgrade is well compacted and capped with an appropriate stone base. With correct compaction, drainage, and a proper crushed-stone base, the system can last for decades; routine maintenance usually means patching low spots, topping material where minor settlement occurs, and keeping drainage clear.

Hello Gravel has a minimum order of 3 tons; many deliveries in urban Ridgewood are offered with low or no delivery fee, but charges can range up to $50 to $100 for restricted access or short-loads. Next-day delivery is available for orders placed before noon CST for an additional fee; get an exact delivery fee by entering your zip code or requesting a quote.

Screened fill-dirt is usually preferred for landscaping, lawns, and grading where a uniform texture, fewer rocks, and better compaction are important for drainage and finishing. Unscreened fill-dirt is cheaper and acceptable for large mass fills or where appearance and fine grading are not critical, but it may contain rocks and debris that affect compaction and drainage.