Fill Dirt in East Pennsauken, NJ

Estimated delivered price for bulk fill-dirt in East Pennsauken for 2025 is generally in the range of $18 to $45 per ton. Final price depends on supplier source, moisture content, haul distance from the quarry, and whether spreading or special access is required. Hello Gravel requires a minimum order of 3 tons and shows exact pricing when you enter your zip code.

Hello Gravel partners with trusted local suppliers and haulers across Camden County and West New Jersey and will match you with nearby quarries when you place an order. Supplier names and availability vary by zip code and stock; check your zip code on our site or contact our team at 855-241-8884 or text 844-407-3734 for a list of local sources. For very large or specialized fills, we can also request material from nearby municipal or county operations.

Most deliveries use tri-axle dump trucks that carry roughly 10–14 cubic yards (about 12–20 tons depending on moisture and soil density). Hello Gravel’s minimum order is 3 tons, and standard delivery is included in many areas; next-day delivery and short-haul or difficult-access fees may apply. Drivers may offer tailgate spreading at their discretion; request it at checkout and they will assess safety and feasibility on arrival.

Calculate cubic yards by multiplying area (feet) times depth (feet) and dividing by 27: (length x width x depth)/27 = cubic yards. Example: 10x20 raised 3 inches (0.25 ft) = 200 x 0.25 / 27 ≈ 1.85 yd3 (≈ 2.3–2.6 tons). Example: 20x30 raised 6 inches (0.5 ft) = 600 x 0.5 / 27 ≈ 11.1 yd3 (≈ 13.3–15.5 tons), using a common conversion of about 1.2–1.4 tons per cubic yard depending on moisture and compaction.

Raw fill-dirt often contains fines and clay that can hold water, which increases risk of settling and frost heave in New Jersey’s freeze–thaw climate. For areas exposed to frost or vehicular traffic, a well-draining granular base (crushed stone or crusher run) with proper compaction is usually a better choice. For non-structural grade changes or landscape fills, use clean, well-compacted fill-dirt and ensure surface and site drainage are addressed to minimize freeze-related movement.

Permit requirements vary by project scope; small landscape grading or under 1,000 cubic yards may not need a county permit, but foundation backfill, major lot grading, driveway reconstruction, or changes to stormwater patterns commonly require a Pennsauken Township or Camden County permit. Always check with the Pennsauken Township Construction/Building Department and the Camden County Soil Conservation District before ordering large volumes. If you’re unsure, our team can point you toward the right local office to confirm requirements.

Compact fill-dirt in uniform lifts (typically 4–6 inches) and control moisture to reach good density; for small areas a vibrating plate compactor is effective, while jumping jack rammers work well in trenches. For larger areas or driveway bases, a small vibratory roller or tandem roller operated by a contractor will give better results. For structural work, aim for engineered compaction targets (commonly around 90–95% of standard Proctor) and consider hiring a pro who can provide compaction testing.

Fill-dirt is intended for raising grade and general backfill but often contains fines and clay, so it’s not ideal as a final driveway surface or structural base. Crusher run or crushed stone provides a stable, well-draining base for driveways and will compact more reliably under traffic. Topsoil is for planting and landscaping; avoid using it for structural backfill or under driveways. Choose material based on function: fill-dirt for bulk volume and grading, crushed stone for base/driveway, and topsoil for planting.

A driveway that uses fill-dirt as the main base will likely require more frequent maintenance—regrading, adding aggregate, and re-compacting every 1–5 years—depending on traffic, drainage, and how well it was installed. Driveways constructed on a proper crushed-stone base typically last much longer and need less upkeep. To extend life, maintain drainage, add a compacted gravel surface layer, and fix low spots promptly to prevent puddling and erosion.

Costs vary by job size and equipment, but expect machine and operator rates commonly between $75 and $150 per hour for compactors and rollers in the East Pennsauken area. For small residential jobs, contractors often quote a combined material, delivery, and installation rate that can range from roughly $15 to $50 per cubic yard, depending on material price, haul distance, access issues, and compaction requirements. Get local quotes—Hello Gravel can help by matching you with local suppliers and approved haulers so you can compare installation estimates.