Fill Dirt in Bellevue, NE

Typical delivered prices in the Bellevue/Omaha area vary by supplier, quantity, and distance, but expect roughly $12 to $35 per ton (about $15 to $45 per cubic yard). Smaller orders, added delivery distance, or next-day requests push costs to the higher end. For an exact price for your address and quantity, check your zip code on Hello Gravel or request a quote.

Bellevue customers are usually served by suppliers and yards in the greater Omaha metro and Sarpy County; many landscape suppliers, excavation companies, and quarries deliver fill-dirt. Hello Gravel lists local suppliers for your zip code; our platform minimum is 3 tons, while many local haulers set practical minimum deliveries at about 5 to 10 cubic yards for a truckload.

Bellevue sees freeze-thaw cycles that can cause frost heave in fine, silty, or clayey fill if it stays wet. To reduce problems, use well-compacted, low-organic fill, provide good surface and subsurface drainage, and avoid placing frost-susceptible fill within the frost depth under structural elements.

For driveways and structural foundation backfill, use engineered granular fill or crushed stone rather than plain fill-dirt. Fill-dirt (free of organics and debris) is acceptable for non-structural yard leveling and landscaping if placed in compacted lifts. If you need backfill next to foundations or under driveways, ask for engineer-approved structural fill or a mix specified for load-bearing and drainage.

Common delivery trucks are tri-axle dump trucks that carry about 10 to 16 cubic yards (roughly 12 to 20 tons depending on moisture). Local weight limits for residential delivery are influenced by street restrictions and site access; drivers will confirm if a tri-axle can safely enter your property. Hello Gravel requires a minimum order of 3 tons and will note any access restrictions when you schedule delivery.

Yes, local codes and permit requirements can apply: structural backfill often needs engineered specifications, compacted lifts, and sometimes compaction testing. Driveway and grading work may require permits to manage stormwater runoff and sight lines. Check with Bellevue Building Inspections or your project engineer before placing large volumes of fill.

Measure the area (feet) times depth (feet) to get cubic feet, divide by 27 to get cubic yards, then multiply by the density factor (use 1.1 to 1.35 tons per cubic yard for typical fill-dirt). Example: 20 ft by 10 ft at 6 inches (0.5 ft) is 100 cu ft = 3.7 yd3, which is about 4.0 to 5.0 tons depending on moisture.

Properly placed and compacted fill-dirt under landscaping is long-lasting but commonly settles a bit in the first year; expect minor regrading or adding topsoil for lawns. Avoid using fill-dirt where you need a stable, frost-resistant base; in those places use engineered aggregate. Good drainage and proper compaction reduce future maintenance.

Common alternatives include crusher run (dense graded aggregate), recycled concrete base, and clean sand or engineered gravel. For driveways and load-bearing backfill pick crusher run or recycled concrete for strength and drainage; for landscaping or planting, clean fill-dirt topped with quality topsoil is appropriate. Local silty and loess-derived soils in eastern Nebraska make granular alternatives a better choice where frost or drainage is a concern.

Rates vary by contractor and project size; expect equipment with operator rates in the Bellevue/Omaha area roughly $70 to $150 per hour for skid-steer or small excavator work. Small spreading projects sometimes run $300 to $1,200 as a flat job price, while larger jobs are usually quoted by the hour or by the ton with compaction included. Always get written estimates that list machine time, operator fees, and compaction testing if required.

Place fill-dirt in lifts of about 6 to 8 inches, compact each lift with an appropriate compactor, and keep material relatively dry during compaction. Protect new fills from standing water and avoid heavy work during very wet or freezing conditions to reduce future settlement and frost issues.

Natural fill materials vary regionally, so color and texture differences are common in Bellevue-area deliveries. If the material seems contaminated or substantially different from your order, contact Hello Gravel customer service promptly so we can work with the supplier to resolve the issue. Keep photos and order notes handy when you reach out.