Fill Dirt in Missoula, MT

Delivered price for fill-dirt in Missoula varies with source, moisture, and haul distance. Instead of a fixed number, expect regional price swings; request a live quote through Hello Gravel for the most accurate per-ton and per-cubic-yard pricing for your address and delivery needs.

Hello Gravel connects you with trusted local suppliers and dump-truck haulers that serve Missoula. For spreading and placement, many customers pair our delivery with local excavators or landscapers; contact our team and we will match you with haulers and recommend contractors in the Missoula area.

Typical loose fill-dirt used here weighs about 1.2 to 1.6 tons per cubic yard depending on moisture and soil type. Use 1.4 tons per cubic yard as a practical rule of thumb for estimating, and ask us for a site-specific estimate if you need higher accuracy.

For structural fills under driveways and building pads, place fill-dirt in 6 to 8 inch lifts and compact each lift to the level specified by the project engineer, commonly around 90-95% standard proctor. For typical homeowner driveway build-ups, plan on 6-12 inches of well-compacted fill-dirt below a permeable base or crushed rock surface to reduce settlement and frost issues.

Western Montana sees significant freeze-thaw cycles that can cause frost heave in poorly drained or loose fills. To reduce heave risk, use well-graded, low-organic fill-dirt, compact in lifts, provide good surface and subsurface drainage, and keep frost-susceptible fines away from critical load-bearing zones.

A clean, well-graded mix with predominately sand and small gravel, limited clay, and minimal organic material balances drainage and compaction best for Missoula. Avoid high-organic topsoil as fill; for areas needing high drainage, increase sand/gravel content or use a drainage layer under the fill.

Permit rules depend on the city or county, the amount of material, and whether you are changing finished grade or affecting drainage. Small deliveries for landscaping often do not need a permit, but larger grading, major lot regrades, or projects near streams or critical areas may require approvals—check with Missoula City Building Division or Missoula County Planning before you order.

Screened fill-dirt has rocks and debris removed and is easier to finish and compact, which is helpful for yards, lawns, and fine grading, but it costs more. Unscreened material is less expensive and fine for rough grading or filling large volume areas, but it may require additional effort to finish or remove oversized material later.

Yes. Winter weather, frozen ground, and snowpack can limit access for dump trucks and may increase delivery times or require lighter loads to protect driveways. Schedule deliveries in spring through fall when possible, and contact Hello Gravel early to plan winter deliveries and discuss site access and staging.

Local contractors use fill-dirt to raise grades, backfill footings and utility trenches, build pads for sheds and outbuildings, and prepare driveway subgrades. Contractors prefer well-graded, low-organic fill that compacts reliably and drains well in Missoula's climate.

Measure the area and desired depth in feet, multiply length x width x depth to get cubic feet, then divide by 27 to convert to cubic yards. Convert cubic yards to tons using a rule-of-thumb of about 1.4 tons per cubic yard for typical fill-dirt, or use Hello Gravel's calculator for a site-specific estimate.

If the delivered fill-dirt doesn't meet your needs or you find unexpected site conditions, contact Hello Gravel customer service right away so we can work with the supplier and hauler to resolve the issue. We will review the situation and advise on next steps; for major quality or contamination concerns you may also need an on-site assessment by a local contractor or the supplier.