Fill Dirt in Weldon Spring, MO

Fill dirt is native or imported soil used to raise or level ground; it contains fines, clay, and sometimes small rock and is not intended as a finished surface. Gravel is crushed rock or rounded stone used for drainage, load-bearing layers, and finished surfaces like driveways. For projects in Weldon Spring, use fill dirt to build grade and gravel as the structural or surface layer.

Generally yes - fill dirt is usually cheaper per cubic yard than crushed gravel because it is a soil product and often locally available. Final cost depends on hauling distance, landfill or borrow fees, and whether the fill is screened or free of debris. Request a quote from Hello Gravel using your ZIP code for an exact delivered price to Weldon Spring.

Prices vary by supplier and distance, but a typical 10-cubic-yard load of basic fill dirt in West Missouri often falls in the $250 to $600 range delivered. Factors that change cost include supplier availability, truck access, and any site restrictions that affect dumping. Use Hello Gravel's quote tool to lock in current local pricing and delivery options.

A rough rule of thumb is that one cubic yard of loose fill dirt weighs about 1.2 to 1.6 tons, so a 10-cubic-yard load is approximately 12 to 16 tons. Actual weight depends on moisture content and local soil composition in Weldon Spring. Keep in mind Hello Gravel's minimum order is 3 tons when ordering online.

You can place gravel over fill dirt, but the fill must be properly compacted and graded first; otherwise the gravel will sink and spread. For driveways, install a compacted subbase of well-graded fill or crushed stone in 4-6 inch lifts and consider a geotextile fabric to reduce mixing. If you are unsure, request optional tailgate spreading at checkout and have the driver inspect the site on arrival.

Yes, fill dirt is commonly used to raise low spots and regrade yards, but you should place it in thin layers and mechanically compact each lift. Also consider final topsoil for planting, ensure slopes direct water away from structures, and check for utility lines before digging. If you are working near streams, wetlands, or steep slopes, check local St. Charles County and Weldon Spring regulations first.

Fill dirt will settle, especially if placed in large lifts or if it contains organics or loose material, so mechanical compaction is recommended for long-term stability. Compact in 4-8 inch lifts with a plate compactor or roller to reduce future settlement, and allow for some additional fill to bring the grade after settling. Local clayey soils in the Weldon Spring area may require extra compaction attention during wet seasons.

It depends on the scope and location of the project; small residential grading jobs often do not need a permit, but larger fills, changes to drainage, or work in floodplains and near wetlands may require approval from Weldon Spring or St. Charles County. Always call local planning or building departments before importing large volumes of material. Also call 811 to locate underground utilities before spreading or digging.

One cubic yard equals 27 cubic feet, so it covers about 324 square feet at 1 inch depth, 81 square feet at 4 inches, and 54 square feet at 6 inches. That means a 10-cubic-yard load will cover roughly 3,240 sq ft at 1 inch, 810 sq ft at 4 inches, or 540 sq ft at 6 inches. Use these estimates when planning yard leveling or backfill in Weldon Spring, and add 5-10% for compaction and settlement.

Enter your ZIP code on our site to see local supplier availability, choose the amount you need (minimum 3 tons), and pick a delivery date from the checkout calendar. Standard delivery is 2+ business days; next-day delivery is available for orders placed before noon CST with an extra fee. Note that tailgate spreading is possible but performed at the driver's discretion, so include site notes at checkout and contact Hello Gravel if you have special access or placement needs.