Gravel in Springfield, MO

One ton of gravel typically covers about 80 to 100 square feet at a 2-inch depth. For a driveway you will usually want 4 to 6 inches of compacted stone for the top layer (and often a deeper compacted base), so plan roughly 3 to 5 times that amount. For example, a 20 ft by 10 ft driveway (200 sq ft) needs about 6 to 12 tons depending on depth and base work; contact us for a site-specific estimate.

A typical tri-axle dump truck used by our haulers carries roughly 10 to 12 cubic yards of loose gravel, which is about 12 to 14 tons depending on material. That load covers roughly 1,000 to 1,500 sq ft at 2 inches or 200 to 400 sq ft at 6 inches. Delivery cost varies by supplier and distance from the pit; many Springfield-area orders qualify for free delivery, so enter your zip code or request a quote to see exact pricing.

Crushed limestone or crushed stone (commonly called 2A or 3/4u0022 road base in Missouri) is often the most cost-effective choice for Springfield driveways because it compacts well and handles freeze-thaw cycles. Hello Gravel can supply the material and arrange dump-truck delivery, but we do not guarantee full installation; drivers may perform tailgate spreading at their discretion and we can connect you with local contractors who handle grading and compaction on request.

Two inches is generally too thin for a driveway that will see vehicle traffic. For Springfield's climate and soil, we recommend a compacted base of 4 to 6 inches of crushed stone under a 1 to 2-inch wearing layer, or a total of 6 to 8 inches if you expect heavy trucks. Installation costs vary with site prep and compaction needs; contact our sales team for a tailored quote including labor and equipment.

Laying gravel directly on undisturbed dirt often leads to rutting and mixing with soil, especially in Springfield's freeze-thaw conditions. We recommend at minimum a compacted crushed-stone base and, in poor soils, geotextile fabric to help with drainage and separation. Hello Gravel supplies the materials and coordinates delivery; if you need prep and installation, we can refer local contractors but do not guarantee installation ourselves.

Sharp sand is not usually the best underlayer for loose gravel; for patios and paths a compacted crushed-stone base (4 inches for paths, 4 to 6 inches for patios under pavers) provides better drainage and stability. For paver patios you may use a thin bedding sand layer over the compacted stone, but for loose gravel surfaces the crushed base is the priority. We can supply crushed stone, sand, and other aggregates to fit your project and recommend build-ups based on the application.

A 50-lb bag of pea gravel contains about 0.5 cubic feet, so it covers roughly 6 sq ft at a 1-inch depth or about 3 sq ft at 2 inches. For anything larger than a few small paths or decorative spots, bulk delivery (minimum 3 tons) is usually far more economical and reduces bag handling. Enter your zip code or contact us to compare bag vs bulk pricing for your Springfield project.

Material estimates: a 20 ft long by 10 ft wide driveway (200 sq ft) at 6 inches total depth requires roughly 3.7 cubic yards, or about 5 to 6 tons of gravel. Supply-only costs depend on the material and delivery; installation (grading, base prep, compaction) varies widely with site conditions, so call our team for a detailed local quote that includes labor, equipment, and any permits.

A 20x20 driveway is 400 sq ft; at a 6-inch depth you will need about 7.4 cubic yards or approximately 10 to 11 tons of material. Supply-only pricing depends on the exact gravel type and delivery zone; installation costs for base prep and compaction depend on site slope, access, and soil type. Contact us with your address or zip code and site photos for a custom supply and installation estimate.

Prices vary by gravel type, local supplier, and delivery distance, so we show real-time pricing on checkout after you enter your zip code. Many Springfield-area orders qualify for transparent pricing and free delivery; discounts or volume pricing may be available for larger orders. For exact per-ton or per-cubic-yard rates and any available discounts, request a quote or call our sales team and we will provide a full breakdown.