Fill Dirt in Fenton, MO

In the West Missouri market around Fenton, delivered fill-dirt usually runs in a range rather than a fixed price. Expect roughly $12 to $35 per ton (about $16 to $45 per cubic yard) depending on cleanliness, moisture, distance, and order size; larger orders generally lower the per-ton price. Check your zip code on our site for exact local supplier pricing and note that Hello Gravel has a 3-ton minimum order.

Yes — Hello Gravel connects you with local suppliers and haulers serving Fenton and West Missouri, and many offer delivery by dump truck. Tailgate spreading may be available but is performed at the driver's discretion; request it at checkout and confirm with customer service if spreading is critical to your project.

For West Missouri clay conditions, a well-graded fill-dirt with a mix of fines and small gravels is commonly used for bulk grade fill, but avoid lots of organic material. If you need a stable sub-base, consider mixing or putting a layer of coarse granular material under the fill to improve drainage and reduce shrink-swell problems in clay soils.

Aim to compact fill-dirt in lifts rather than all at once: typical lift thickness is 6 to 8 inches for hand-operated plate compactors and 8 to 12 inches if using heavier rollers. Contractors in Fenton usually target good compaction (commonly 90% or higher of standard compaction tests) and will use a plate compactor or vibratory roller depending on the job size and soil type.

Fenton experiences seasonal freeze-thaw cycles and moderate rainfall, which can cause settlement and frost heave if fill contains organic material or is poorly drained. Use well-compacted, low-organic fill-dirt with a coarse drainage layer where water collects, and slope grades away from structures to reduce long-term moisture issues.

Fill-dirt is the least expensive option for raising grade, but it drains poorly and is not recommended as a finished driving surface. Crusher run and road base are compactible and make better structural sub-bases for driveways, while washed gravel gives the best surface drainage and appearance; for long-lasting driveways in Fenton, use fill-dirt only as grade fill and top with road base or crushed stone.

Permitting requirements can vary by project type; simple yard grading usually does not require a permit, but structural foundations, retaining walls, and some extensive driveway or drainage changes may. Check with the City of Fenton building and planning department and St. Louis County (if applicable) before major earthwork, and keep documentation of compaction if an inspector requests it.

Soil weights vary, but a good rule of thumb is 1.2 to 1.5 tons per cubic yard for typical fill-dirt. To raise 500 sq ft by 6 inches you need about 9.3 cubic yards, or roughly 11 to 14 tons; for 1,000 sq ft at 6 inches double that to about 18.5 cubic yards, or 22 to 28 tons. Use Hello Gravel's material calculator or contact our team for a precise estimate based on your desired depth and local material density.

If properly compacted and drained, fill-dirt used as sub-base should be largely maintenance free, but you may need occasional regrading after settling or significant storms. For exposed areas, add topsoil and vegetation to control erosion, and inspect low spots after heavy rain to decide if more fill and compaction are needed.

Common issues include contaminated loads with organic debris, inconsistent gradation that leads to uneven settling, and delivery placement problems due to limited truck access. Avoid these by ordering clean, specified fill-dirt through Hello Gravel, inspecting delivered material before spreading, marking/clearing an accessible drop zone, and communicating any spreading needs in advance.

Use the Hello Gravel website to enter your zip code, choose 'fill-dirt', and calculate quantities with our calculator; keep in mind our 3-ton minimum. Select your delivery date at checkout, add any drop instructions or spreading requests in Order Notes, and contact our sales team at 855-241-8884 if you need help matching material specs to Fenton soil conditions.