Fill Dirt in Philadelphia, MS

Fill-dirt is soil used to raise or level the ground and is typically low in organic matter. In Philadelphia, MS it’s most often used for grading, filling low spots, and under foundations or slabs where proper compaction is needed rather than as a finished top layer.

Typical delivered prices in the West Mississippi area generally range from about $8 to $25 per ton, depending on haul distance, source quality, screening, and whether material contains clay or debris. Ask Hello Gravel for a local quote—we show precise pricing for your zip code and factors that may affect the total.

Local sources usually include regional sand-and-gravel pits, landscape suppliers, and municipal borrow pits within a 20-50 mile radius of Philadelphia. Hello Gravel can connect you with vetted suppliers and haulers in your area—check your zip code on our site or contact our team for specific vendor options.

Estimate volume first: area (sq ft) × depth (inches) ÷ 324 = cubic yards. Fill-dirt in this region typically weighs about 1.2–1.4 tons per cubic yard (use 1.3 tons/yd3 as a rule of thumb). For example, a 12'×50' driveway (600 sq ft) at 4u0022 deep is about 7.4 cu yd ≈ 10 tons of fill-dirt.

Fill-dirt can work but needs care: local clay soils hold water and can shrink or swell, so compaction, drainage, and proper gradation matter. For load-bearing areas or where drainage is important, contractors often mix or replace some fill-dirt with compactible granular material or add drainage layers and geotextile.

Small residential deliveries usually do not require a permit, but projects that change site grading, affect stormwater runoff, are near wetlands, or exceed local thresholds may need approvals from Philadelphia or Neshoba County. Contact the city building/zoning office before major fills, and let your contractor or Hello Gravel know if a permit is required so we can coordinate delivery timing.

Contractor pricing varies by job size: small jobs may run $150–$600 for labor and equipment; larger installs are often quoted per ton, commonly $8–$30/ton installed depending on site difficulty and compaction requirements. Ask for itemized quotes that separate hauling, spreading, and compaction so you can compare local bids accurately.

Fill-dirt is fine for raising grade or backfill, but it is not recommended as the wearing surface for driveways or as the primary drainage medium. For driveways and drainage in Mississippi’s clay soils, a crushed stone or crusher-run base over properly compacted fill is preferred to improve stability and runoff.

Yes—Philadelphia’s wet seasons and heavy summer storms can make yards muddy and limit truck access. Schedule deliveries during drier windows when possible, provide a clear access route for dump trucks, and consider ordering fewer loads at a time or using next-day delivery options if weather threatens access.

Some settling is normal, especially in the first year after placement and in areas with high clay or organic content; expect to top up low spots and regrade. Proper compaction during installation and adding vegetation or a topsoil finish helps reduce erosion and ongoing maintenance.

Watch for excessive organic matter, roots, construction debris, trash, and high silt or clay content that can cause settling or poor compaction. Ask suppliers about material source and screening; request a sample or photos and note any quality concerns in your order so Hello Gravel can help match a cleaner, construction-grade fill if needed.

Hello Gravel has a 3-ton minimum order and standard delivery is scheduled for 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee. Drivers may be able to tailgate spread at their discretion—request it at checkout, but note this service is not guaranteed.