Gravel in New Troy, MI

Typical delivered price for common gravels in the Detroit-Warren area is roughly $30 to $60 per ton, depending on type (pea, crushed, crusher run), distance, and seasonal demand. Specialty stone or washed decorative gravels can be higher. Hello Gravel has a 3-ton minimum and can show specific supplier pricing when you enter your zip code.

For Michigan freeze-thaw conditions choose angular, well-graded crushed stone that compacts and locks together, such as crusher run for bases and #57 or #8 crushed stone for top layers. Limestone-based mixes are common in southeast Michigan because they compact well, while pea gravel is less ideal for driveways because it shifts and can heave. Good drainage and a stable base matter as much as stone choice to reduce frost heave.

Use these examples as a guide: a 12x40 driveway (480 sq ft) will need about 4.4 cubic yards (about 6.6 tons) for a 3u0022 layer, 5.9 cubic yards (about 8.9 tons) for 4u0022, and 8.9 cubic yards (about 13.3 tons) for 6u0022. A 20x40 driveway (800 sq ft) needs about 7.4 cubic yards (11.1 tons) at 3u0022, 9.9 cubic yards (14.8 tons) at 4u0022, and 14.8 cubic yards (22.2 tons) at 6u0022. These estimates use 1.5 tons per cubic yard; plan extra for compaction, grading, and waste.

Yes. Hello Gravel works with a network of local suppliers and contracted haulers that serve the Detroit-Warren area and nearby towns like New Troy. Enter your zip code on our site or contact our team to see available suppliers, delivery windows, and material photos from vendors who deliver to your address.

Gravel driveways can be plowed, but plows often pick up and move material, so you should use proper edging, a stable base, and a coarser top layer to reduce loss. Road salt can wash fines and erode edges; using good drainage and periodic replenishment helps. Expect to regrade or add topcoat more often than with paved surfaces, especially after heavy snowplowing.

Costs depend on site prep and material quality, but typical components in the Detroit area are: base material $30-$60 per ton, geotextile fabric $0.30-$0.60 per sq ft, edging $1-$3 per linear ft, and compaction/labor $0.50-$2 per sq ft. For a small driveway the full installed price commonly ranges from a few hundred dollars for a DIY job to $1,500-$5,000 for professional installation depending on excavation and drainage work. Contact Hello Gravel for delivered material pricing and local contractor estimates for labor.

For slopes use larger, angular stone that resists movement and promotes infiltration: 1 to 3-inch crushed stone or a mix of #3 crushed stone and riprap works well for steep channels. Combine rock with geotextile fabric underneath to prevent washout and direct water to stabilized channels or drainpipes. For gentler slopes a well-graded crusher run topped with #57 stone gives a balance of stability and drainage.

Rules vary by township and HOA. New Troy is a small community so check with your local township building or zoning office and any HOA documents before changing driveway surfacing. If you are in a Detroit suburb, many municipalities have specific setback, runoff, or curb-cut rules; confirming before ordering materials avoids surprises.

Plan light maintenance annually—raking, regrading low spots, and adding a few tons of topcoat every 1 to 3 years—and a deeper refresh with new base every 3 to 7 years depending on traffic and winter conditions. Annual costs for routine upkeep in the Detroit area are commonly $50 to $600, depending on whether you do it yourself or hire a contractor and how much material is needed. Good drainage, edging, and prompt repair of potholes reduce long-term expense.

Gravel is the lowest initial cost and easiest to install but requires more regular maintenance and has a shorter practical lifespan than asphalt or pavers. Asphalt offers a smoother surface and lower maintenance for several years but can crack from freeze-thaw and may need sealcoating or repaving after 10-20 years. Pavers cost the most up front, provide the best curb appeal and durability, and can help resale value, but they require proper base work and higher initial investment.