Gravel in Hyattsville, MD

Prices vary by material and supplier, but expect common gravels (crushed stone, pea gravel) to run roughly $30-$60 per ton in the Hyattsville area. Delivery fees often depend on distance and load size; many orders get free delivery while smaller orders or long-haul deliveries may incur $50-$150 in trucking charges. Hello Gravel requires a 3-ton minimum and offers standard delivery in 2+ business days, with a next-day option available for orders placed before noon CST.

Hello Gravel connects you with trusted local suppliers and contracted haulers that deliver to Hyattsville zip codes, so the exact supplier depends on your address and material choice. If you want specific company names or landscapers, contact Hello Gravel or check the supplier list shown at checkout; local landscape contractors and garden centers in Prince George's County also commonly deliver and install gravel.

For driveways, angular crushed stone (3/4u0022 to 1u0022) or a compactable mix with fines gives better lock and stability in Hyattsville's freeze-thaw climate. For walkways, 3/8u0022 crushed stone or pea gravel provides a comfortable walking surface—pea gravel is rounded and attractive but can shift more easily, so add edging and a compacted base if needed. River rock is best used as decorative accents or drainage features rather than as a primary driveway surface.

Use this quick guide: a standard 2-car driveway (about 12' x 40') needs roughly 4-6 cubic yards (about 6-9 tons) for a 3u0022 surface; a full rebuild with a 6u0022 compacted base can need 9-12 cubic yards (about 13-17 tons). A 10' x 10' patio at 2u0022 depth takes about 0.6 cubic yards (roughly 1 ton), and a 3' x 30' pathway at 2u0022 takes about 0.6 cubic yards (roughly 1 ton). These are estimates—measure your area and account for compaction and waste when ordering.

Installation costs vary with scope: simple resurfacing often runs lower, while full excavation, base installation, grading, and edging increase costs. Typical ballpark ranges are $3-$8 per square foot for a properly installed gravel driveway in the region, so a 12' x 40' driveway might run roughly $1,400-$3,800 installed. Get multiple local contractor quotes and ask for references and a written scope before hiring.

Hyattsville's hot summers and freeze-thaw winters can cause loose or rounded gravels to shift and fines to migrate, creating ruts and washouts after heavy rain or thaws. Use angular, well-graded crushed stone with a stable base and good drainage to resist freeze-thaw movement. Plan for annual maintenance like regrading and adding material after winter to keep surfaces even.

Regulations vary by property and HOA rules; some Hyattsville neighborhoods or HOAs limit visible gravel or require specific materials, front-yard treatments, or stormwater controls. Check Hyattsville city zoning and permitting resources and review your HOA covenants before installing a new gravel driveway or converting lawn area to gravel. If in doubt, contact Hello Gravel or your local planning department for guidance.

Prepare the subgrade by removing organic soil, adding geotextile fabric where soft or clayey soils exist, and installing a 4u0022-6u0022 compacted base of angular crushed stone for driveways. Slope the surface for positive drainage, add swales or a perforated drain where water collects, and install firm edging (pavers, timber, or metal) to keep material contained. In heavier clay spots common to Prince George's County, prioritize drainage and thicker base layers to prevent settling.

Use plastic snow shovels, a snow blower, or a plow set to ride slightly above the surface to avoid pulling up gravel; mark the driveway edges with stakes so plows and shovels avoid the edges. Expect to regrade and add gravel in spring after freeze-thaw and plowing have displaced material, and consider a coarser top layer mixed with fines to help particles lock together during winter.

Gravel usually has the lowest upfront cost among common driveway materials and installs faster, but it requires more ongoing maintenance like periodic top-ups, grading, and weed control. Asphalt and concrete have higher initial costs but generally need less frequent material replacement; pavers cost the most up front but offer long-term durability and curb appeal. Consider your budget, maintenance tolerance, drainage needs, and local appearance standards when choosing.