Stone in South Baton Rouge, LA

Delivered stone in South Baton Rouge commonly runs about $30 to $60 per ton, which is roughly $40 to $85 per cubic yard depending on stone type, supplier distance, and season. Specialty stone (large river rock or riprap) is usually at the higher end. Hello Gravel has a 3-ton minimum and delivery fees or free-delivery promotions can affect the final price.

Suppliers around South Baton Rouge typically stock 3/4u0022 crushed limestone, #57 crushed stone, crusher run (road base), pea gravel, river rock (for landscaping), and riprap for erosion control. Availability can vary by supplier because local quarries reflect Louisiana geology, so color and texture will change by neighborhood.

Hello Gravel requires a minimum order of 3 tons for delivery, but many local contractors order full dump-truck loads (10 to 15 tons) to get lower unit pricing. Standard delivery is often included or modestly priced within nearby areas; fees commonly range from free up to $50-$150 for longer hauls or small jobs. Next-day delivery is available if ordered before noon CST for an extra fee.

South Baton Rouge’s clay soils and frequent heavy rain increase the risk of rutting, washout, and standing water under and around stone surfaces. Proper base preparation, good slope for runoff, and geotextile separation are essential to prevent the stone from sinking into soft clay and to maintain drainage. Without these measures, you will need more frequent grading and topping after storms.

Rules vary by neighborhood and parish: many parts of East Baton Rouge Parish permit gravel driveways, but some HOAs or specific subdivisions have design covenants that restrict visible rock or require concrete/asphalt. Before you install stone, check East Baton Rouge Parish permit guidance and your HOA covenants, or contact Hello Gravel’s team for local supplier knowledge and typical neighborhood practices.

Remove topsoil and organic material, put down a nonwoven geotextile to separate clay from your base, then install and compact a 4u0022 to 6u0022 layer of 3/4u0022 crushed stone for typical residential driveways (6u0022 to 8u0022 for heavier loads). Compact in 2- to 3-inch lifts with a plate compactor or small roller, and install a physical edge restraint to keep material contained. Aim for consistent slope (at least 1% to 2%) so water runs off the surface.

Use cubic yards = (width ft x length ft x depth in) / 324, then convert to tons using about 1.4 tons per cubic yard for crushed stone (this varies by stone type and moisture). Example: a 12 ft by 50 ft driveway at 4 inches deep needs about 7.4 cubic yards, or roughly 10.5 tons; order 10% to 15% extra to allow for compaction and waste. Remember Hello Gravel’s minimum order is 3 tons, so small projects may be priced accordingly.

With proper base and drainage, a crushed-stone driveway can function well for many years, but in South Baton Rouge’s wet climate you should expect periodic topping or regrading every 2 to 5 years depending on traffic. Routine maintenance—regrading, spot refilling, and clearing ditches—often costs $50 to $300 per year for a typical homeowner; more extensive grading or hauling new stone runs higher. Good initial prep reduces long-term expenses.

Stone is usually the lowest upfront cost and gives the best drainage, making it a good fit for South Baton Rouge’s rainy, clay-heavy conditions when properly installed. Crushed concrete behaves similarly to stone for drainage and can be cost-effective and sustainable, though it may contain fines that compact differently. Asphalt provides the longest-lasting, low-maintenance surface for driveways with heavy traffic but costs more up front and needs proper edge and subbase preparation to prevent drainage problems.

Yes—nonwoven geotextile fabric is commonly used to separate clay from stone and usually costs about $0.10 to $0.50 per square foot installed. Edging (metal, plastic, or timber) is commonly used to hold stone in place and ranges roughly $2 to $8 per linear foot depending on material. Polymer binders and gravel stabilizers are available and can reduce migration and dust at a higher cost, typically $0.50 to $2.00 per square foot; effectiveness varies, so check local contractor experience before committing.