Fill Dirt in Gretna, LA

Delivered fill-dirt prices in Gretna usually vary with volume, moisture content, and truck access. Expect a rough range of about $8 to $25 per cubic yard (approximately $10 to $30 per ton) for typical residential deliveries, with larger orders getting lower per-unit pricing. For an exact price based on your address and project size, request a quote through Hello Gravel.

Hello Gravel works with multiple local suppliers and haulers in West Louisiana rather than a single vendor, so availability varies by zip code. Our platform accepts a minimum order of 3 tons, but many suppliers and delivery trucks operate more economically with 3 to 5 cubic yards or a partial truckload; full tri-axle deliveries commonly start around 10 cubic yards. Check your zip code on Hello Gravel or contact our team for supplier-specific minimums and delivery options.

For structural work in Gretna, use clean, well-graded fill with minimal organic material and clay content, and avoid material with lots of roots or trash. Place fill-dirt in 4 to 8 inch lifts and compact each lift; a typical target is 90% to 95% relative compaction for building pads and driveways when required by local codes or engineers. For driveways, cap fill-dirt with a compacted aggregate base (crushed stone) because fill-dirt alone does not provide reliable long-term surface strength or drainage.

Fill-dirt in Gretna tends to hold moisture and can settle or rut in prolonged wet conditions, so it is not ideal as a final surface in flood-prone or high-water-table areas. For sites near levees or in mapped floodplains, engineered fill, proper drainage, and elevation per local floodplain rules are recommended; untreated fill-dirt can compress and shift after placement. Always check local elevation and floodproofing requirements before importing large amounts of fill-dirt.

Deliveries are typically made by tri-axle dump trucks that haul about 10 to 14 cubic yards (roughly 12 to 16 tons, depending on moisture). Hello Gravel has a minimum order of 3 tons, and many deliveries in Gretna qualify for free delivery, though tight access, long driveways, or next-day requests can incur additional fees. Make sure there is sufficient turning room (roughly 40 to 60 feet), 12 to 14 feet of overhead clearance, and firm ground for the truck to avoid additional charges or delivery delays; tailgate spreading is sometimes available at the driver’s discretion.

Use this quick formula: cubic yards = (square feet x depth in inches) / 324, and then multiply cubic yards by about 1.25 to estimate tons (varies with moisture). Example per inch of depth: a 12 ft x 50 ft driveway (600 sq ft) needs about 1.85 cubic yards or ~2.3 tons per inch; a 12 ft x 12 ft patio (144 sq ft) needs about 0.44 cubic yards or ~0.55 tons per inch; a 1,000 sq ft backyard requires about 3.09 cubic yards or ~3.9 tons per inch.

You may need permits or elevation approvals from Jefferson Parish and to follow FEMA floodplain regulations when raising grades or placing fill-dirt in mapped flood zones. Properties near the Mississippi River levees may also be subject to additional restrictions from local levee districts or the U.S. Army Corps of Engineers. Before ordering large volumes, contact the Jefferson Parish Building and Water Department or your local floodplain administrator and mention any planned elevation changes.

Fill-dirt commonly settles over months to a year, especially in wet climates like Gretna, so plan on regrading and adding material after initial settlement. Expect to top off low spots, recompact, and monitor for rutting after heavy rains; driveways should get a gravel or crushed stone wearing surface to reduce ongoing maintenance. Regular inspections and annual touch-ups are typical for landscaped areas built with fill-dirt.

Choose fill-dirt when you need to raise grade or fill large volumes cheaply for landscaping or nonstructural areas, but avoid it as the final surface where drainage and load-bearing are required. Use crushed stone or clean aggregate for driveway bases, pads, and areas needing good drainage and compaction; engineered clean fill is better where codes require controlled compaction or in flood-prone sites. If in doubt, ask a local engineer or Hello Gravel for material recommendations based on your project and location.

Yes. West Louisiana has a humid climate with a rainy season and high groundwater, so schedule deliveries and placement during drier periods to improve compaction and reduce delays. Heavy rains can make sites inaccessible and make compaction ineffective, so allow extra time in spring and summer and consider off-season scheduling for large earthwork. Contact Hello Gravel to check local supplier availability and to choose the best delivery window for your project.