Fill Dirt in Denham Springs, LA

For residential quantities in Denham Springs, delivered fill-dirt commonly runs about $15 to $35 per ton depending on source, haul distance, and truck access. Smaller orders or long hauls push the higher end; Hello Gravel’s minimum order is 3 tons and final price is confirmed at checkout for your zip code.

Local suppliers are usually regional quarries, landscaping supply yards, and dirt subcontractors serving Livingston Parish and nearby Baton Rouge areas. Minimums vary by supplier and truck type; Hello Gravel’s platform accepts orders starting at 3 tons, while some local haulers may require 5 to 10 tons for economical delivery—confirm minimums at checkout or call our team.

For raising grade and structural fills in Denham Springs, choose select fill with low organic content, well-graded sand-clay (clayey sand) or engineered compactable fill; avoid topsoil and high-organic material. For driveways, use compacted select fill under a crushed-stone or crusher-run surface; for house pads, use engineered structural fill compacted in lifts and follow a geotechnical recommendation due to local clay and high water table.

Structural fills and house pads are typically compacted to around 90 to 95 percent of standard Proctor density, while driveway subgrades are commonly 85 to 95 percent depending on design. Use plate compactors or vibratory compactors for thin lifts and walk-behind rollers for narrow jobs; larger fills will need sheepsfoot or vibratory rollers. Plan compaction during drier weather because Denham Springs humidity and clay soils make achieving density harder when too wet.

Use this rule: 1 cubic yard covers 324 square feet at 1 inch of depth. Fill-dirt in this area typically weighs about 1.1 to 1.3 tons per cubic yard, so one inch over 1,000 square feet is roughly 3.7 to 4.0 tons. Always add 10 to 20 percent extra for compaction and settlement, and get a site-specific estimate for clayey spots in Denham Springs.

Possibly. Because Denham Springs and Livingston Parish include flood zones and regulated drainage systems, large grade changes or fills in floodplains often trigger review by the city or parish building and permitting offices. Before importing substantial volumes, check with the City of Denham Springs and Livingston Parish planning or building department and with your homeowner association if applicable.

No. Fill-dirt is designed to raise grade and provide compactable subgrade; it is not a durable wearing surface. For driveways and erosion control in West Louisiana’s heavy rain and clay soils, crusher run or a well-graded gravel/sand mix on top of compacted fill performs much better—these materials shed water and resist rutting. Use fill-dirt for subgrade work only and top with crushed stone or stabilized surface for long-term performance.

A driveway relying on uncompacted fill-dirt alone will perform poorly and may rut or wash out within a single rainy season. If you use compacted select fill under a proper crushed-stone surface, expect usable life measured in years with routine maintenance: regrading after heavy storms, adding stone every 1 to 3 years, and ensuring drainage away from the pavement. Regularly clear sheet flow and maintain edges to reduce erosion in Denham Springs’ heavy-rain climate.

Order through the Hello Gravel site to see local supplier options and final pricing for your zip code; our minimum is 3 tons and delivery windows are selectable at checkout. Add placement notes (preferred drop area, obstacles, gate codes) and request tailgate spreading at checkout if you want the driver to consider it; remember spreading is at the driver’s discretion and not guaranteed.