Fill Dirt in South Campbellsville, KY

Delivered fill-dirt prices in South Campbellsville typically range from about $12 to $28 per ton, depending on quality, truck access, and site conditions. That equates to roughly $15 to $34 per cubic yard using a common conversion of about 1 cubic yard = 1.2 tons; final price may vary by supplier and exact material specs.

Hello Gravel connects you with trusted local suppliers and hauling fleets serving West Kentucky who deliver to South Campbellsville; we do not dispatch our own trucks but coordinate local haulers. Typical lead times are our standard 2+ business days, with a next-day option for orders placed before noon CST (additional fee may apply); larger loads or special-site access needs can extend scheduling times.

For clay-prone areas around South Campbellsville, choose fill-dirt with low organic content and good grading so it compacts well and sheds water; avoid topsoil or 'loam' for structural fills. For driveway bases and foundation backfill, use free-draining granular material (sand/clean stone or select fill) directly under load-bearing layers, and reserve native-style fill-dirt for non-structural mass fill where appropriate.

Compact fill-dirt in thin lifts—typically 6 to 8 inches loose depth per lift—using a plate compactor for small areas or a vibratory roller/sheepsfoot roller for larger jobs; aim for consistent firm bearing before adding the next lift. For driveway bases, plan on a compacted granular base of 4 to 8 inches under paving, and hire local contractors for heavy compaction since Hello Gravel deliveries do not include compaction services.

Yes. West Kentucky's freeze-thaw cycles and heavy clay soils hold water and can cause movement, so avoid placing large fills when the ground is saturated or during freeze cycles. Provide positive slope away from structures (about 5% for the first 10 feet when possible), add drainage features where water collects, and use erosion controls on slopes to limit washout in heavy rain.

Local rules vary: small landscape fills usually have few requirements, but large fills, grading near waterways, or fills that affect stormwater may require permits or erosion control measures from the City of Campbellsville or Taylor County. Always check with the Campbellsville building/zoning office before importing large volumes, and keep documentation from your supplier showing the fill is clean and free of contamination.

Calculate cubic yards by multiplying area (sq ft) by depth (ft) and dividing by 27. For example, raising a 1,000 sq ft yard by 6 inches (0.5 ft) needs about 18.5 cubic yards, which is roughly 22 tons using a 1.2 tons-per-cubic-yard rule; order a little extra for compaction and settlement and remember our minimum order is 3 tons.