Gravel in Richmond, KY

Prices vary by type and supplier, but typical Richmond ranges are: crusher run $20-$40 per ton, #57 crushed stone $25-$45 per ton, and pea gravel $30-$60 per ton. Local factors like quarry distance, truck access, and seasonality can push prices up or down, so get a quote for your zip code.

Hello Gravel requires a 3-ton minimum and offers standard delivery in 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee. Many local suppliers include free delivery inside a short radius, while others charge $25-$100 depending on distance; tailgate spreading is at the driver’s discretion and optional spreading fees, if offered, commonly run $50-$150.

For Richmond’s freeze-thaw cycles and clay-rich soils, angular crushed stone (for example 3/4u0022 to 1u0022 crushed stone or crusher run) provides the best compaction and drainage for driveways. A compacted base layer of larger crushed stone with a 1/4u0022-3/4u0022 wearing surface gives good durability; avoid smooth river rock on driveways because it shifts and compacts poorly on clay.

For a 12 x 200 ft driveway (2,400 sq ft), approximate tonnage depends on depth: a 3u0022 surface layer needs about 31-33 tons, a 4u0022 compacted base needs about 40-42 tons, and a 6u0022 full-depth section needs about 60-63 tons. These estimates assume roughly 1.4 tons per cubic yard; always round up and discuss compaction with your supplier.

A 3 ft by 50 ft path at a 2u0022 depth requires about 2-3 tons, while a 10 ft by 10 ft patio at a 2u0022 depth needs roughly 3-4 tons. For base layers (4u0022 to 6u0022), multiply those material amounts by two to three times; check your required depth and compaction level before ordering.

Basic gravel delivery plus spreading by a contractor in Richmond often runs $2.00-$4.00 per sq ft including excavation/grade, geotextile, base stone, and compaction, while a minimal DIY install (materials only) will be cheaper but still requires equipment rental. More extensive prep, drainage work, or driveways on poor soils can push installed costs to $4.00-$6.00 per sq ft.

A properly built gravel driveway in Richmond typically lasts 10-25 years with routine maintenance, though heavy freeze-thaw cycles and clay can cause ruts and washouts. Plan to regrade and add 1/2u0022 to 1u0022 of fresh material every 1-3 years, fix low spots after major storms, and keep edges contained to reduce spreading into yards.

Initial installed gravel is generally less expensive: roughly $1-$3 per sq ft versus $4-$7 per sq ft for asphalt. Over 10 years, gravel requires more frequent small maintenance (regrading, adding material) while asphalt needs occasional sealcoating and potential resurfacing; total 10-year costs can favor gravel for low-volume drives, but asphalt may be cheaper for high-traffic situations or where a smooth finish is preferred.

Standard lead time is 2+ business days through Hello Gravel, with next-day options available if ordered before noon CST; local suppliers may need 3-7 days in busy seasons. Peak demand is spring and early summer and sometimes fall, so expect longer lead times and slightly higher prices during those periods.

Rules vary: some Madison County and Richmond neighborhoods or HOAs restrict driveway surfacing or require permits and setbacks. Before starting work, check with the City of Richmond planning department, Madison County zoning, and any HOA covenants to confirm local requirements.

For erosion control in Richmond’s clay soils, use angular crushed stone or larger graded rock (1u0022 to 4u0022 depending on slope steepness) and install over geotextile fabric to stabilize soil. Avoid fine rounded gravels on slopes; use larger stone or riprap for concentrated flows and incorporate vegetation where possible to reduce runoff velocity.