Fill Dirt in Richmond, KY

For 1,000 sq ft: 2 inches = about 6.2 cubic yards, 4 inches = about 12.3 cubic yards, and 6 inches = about 18.5 cubic yards. These figures are volume estimates; if you order by weight note that 1 cubic yard of fill dirt in Richmond can weigh roughly 1.1 to 1.4 tons depending on moisture and soil type.

Most local dump trucks used for aggregate deliveries in the Richmond area carry roughly 8 to 14 cubic yards per load depending on truck type and material. So for 1,000 sq ft you would typically need about 1 truck at 2u0022 (6.2 yd3), 1 truck at 4u0022 (12.3 yd3 may fit in one larger truck or two smaller loads), and 2 trucks at 6u0022 (18.5 yd3).

Prices fluctuate with season and supplier, but a reasonable ballpark for fill-dirt delivered to Richmond is about $12 to $35 per cubic yard. For a single dump-truck load (roughly 8–14 yd3) expect a delivered price commonly in the $150 to $450 range depending on distance, access, and seasonal demand.

Hello Gravel requires a minimum order that aligns with our marketplace policy (minimum 3 tons) and lists fill-dirt by cubic yards on the site. You can check availability for Richmond ZIP codes, pick your delivery date, and see any delivery fees up front before checkout.

Drivers may be able to offer tailgate spreading at their discretion; you should request it at checkout but understand it is not guaranteed. For full spreading and compaction services many Richmond suppliers or local contractors offer additional machine work for a fee, typically billed based on job size, equipment needed, and travel time.

Rates vary widely by contractor and equipment, but typical local costs for mechanical spreading and compaction can range from about $75 to $200+ per hour or a job-based price depending on acreage, site access, and whether a skid-steer, mini-excavator, or roller is needed. Ask for an itemized quote so you can compare mobilization, hourly rates, and any dump-site preparation fees.

Permitting depends on scope: small landscaping fills usually do not need a permit, but large fills, site grading, driveway work, or any activity affecting stormwater may require permits or review from the City of Richmond or Madison County Planning and Development. Before a large delivery or major grading project, contact Richmond City Hall or Madison County planning to confirm local rules and any erosion control or drainage requirements.

Madison County soils commonly include silt and clays with limestone influence; low-lying spots can drain slowly and hold water after rain. If drainage is a concern, gravel with a geotextile and proper subbase is often better for driveways and load-bearing surfaces, while fill-dirt is suitable for raising grade, backfill, and landscaping where compaction and moisture control are addressed.

Best practice is to place fill-dirt in compacted lifts of about 4 to 6 inches and compact each lift to the specified density for your project. For structural work or under slabs, follow an engineer's compaction specifications; for general yard fill, aim for consistent compaction and avoid placing very wet material that will settle later.

Hello Gravel's standard delivery window is 2+ business days, and next-day delivery may be available for orders placed before noon CST for an extra fee. Actual lead times in Richmond depend on supplier stock, seasonal demand, and weather; during busy landscaping season allow several days to a week for scheduling.

Yes: common options include general fill-dirt for grading and landscaping, clean fill (fewer organics and debris) for better compaction, and structural fill engineered for load-bearing applications. Use clean or structural fill when you need reliable compaction under foundations, slabs, or driveways, and reserve standard fill-dirt for non-structural grade adjustments and backfill.

Slope the site away from structures, compact in 4–6u0022 lifts, avoid placing very wet material, and install proper drainage (swales, outlet pipes) where water gathers. Where soft soils exist, consider a geotextile fabric and a layer of crushed stone before placing fill-dirt, and finish exposed surfaces with topsoil or gravel depending on use to reduce erosion and future settling.