Fill Dirt in Hollister, ID

Typical delivered prices for fill-dirt in West Idaho can vary with supplier, haul distance, and order size. Expect a broad range of roughly $10 to $30 per ton delivered for small residential orders, though your actual price may be higher or lower depending on local material availability and trucking. The quickest way to get an accurate price is to enter your Hollister zip code on our site or request a quote so we can match you with nearby suppliers.

Use clean, compactable fill-dirt with low organic content and minimal clay for raising or grading in Hollister. Select or engineered fill that compacts well and drains reasonably will settle less and perform better in our dry summers and cold winters. If you are building a driveway or structural pad, consider using select fill or a granular base rock instead of generic fill-dirt.

To raise 1,000 square feet by 6 inches you need about 18.5 cubic yards of material (1,000 sq ft x 0.5 ft = 500 cu ft; 500 / 27 = 18.5 cu yd). Using a typical compacted fill-dirt conversion of roughly 1.2 to 1.4 tons per cubic yard, that equals about 22 to 26 tons. We recommend ordering 10 to 15 percent extra (about 25 to 30 tons total) to account for compaction and settlement.

Fill-dirt can be used for backfill if it is the right type and properly compacted, but not all fill-dirt performs well through freeze-thaw cycles. For foundation backfill in the Hollister area, choose low-organic, well-graded fill and compact it in thin lifts with proper moisture control; granular materials with better drainage reduce frost heave risks. For critical foundation work, consult an engineer or use tested structural fill and compaction testing to meet local building codes.

No—fill-dirt is not a substitute for topsoil for planting. Fill-dirt has little organic matter and poor fertility, so plants, turf, and gardens will struggle unless you add a layer of quality topsoil or compost. If you are raising landscape grades, plan to cap fill-dirt with several inches of topsoil before planting.

Crusher run (a mix of crushed rock and fines) is a better choice for driveway bases because it compacts tightly and provides drainage and load-bearing strength. Fill-dirt is suitable for raising grade or filling voids, but as a surface or base it tends to rut and retain moisture unless covered with a structural rock layer. For long-term durability in rural Hollister driveways, use a compacted crusher-run base topped with a wearing course of gravel.

Fill-dirt used only as a surface will usually require maintenance within a few seasons and may need major repairs within 1 to 5 years under vehicle traffic. If fill-dirt is properly compacted and covered with a durable gravel or crushed-rock wearing surface, the underlying fill can last many years, with the wearing layer needing periodic maintenance. Longevity depends on traffic loads, drainage, and how well the road is constructed and maintained.

Yes—Hello Gravel partners with local suppliers around Hollister to provide delivered fill-dirt. Enter your Hollister zip code on our website, select fill-dirt, and request a quote or schedule delivery; our platform shows pricing, delivery times, and minimum order requirements (3 tons minimum). If you prefer personal help, call our sales team at 855-241-8884 or text 844-407-3734 for guidance and quotes.

There can be local weight limits and road restrictions on county or private roads around Hollister, so large deliveries may require permits or special routing. Also confirm that driveways, gates, and overhead clearances can accommodate a tri-axle dump truck and that the drop location is accessible and safe. We recommend checking with your local county highway department or HOA before ordering large loads and telling us about any access constraints at checkout.

Driveways with a fill-dirt surface need frequent grading, compaction, and the occasional addition of gravel or crusher-run to control ruts and dust in Hollister's dry summer climate. Light watering and rolling after grading can help settle fines and improve compaction temporarily, but the best long-term fix is a durable wearing layer of crushed rock. Schedule seasonal maintenance—especially after wet periods or heavy use—to keep the surface stable and minimize dust.